Water Source Piggyback Float Switch for Sump and Sewage Pumps
This wide-angle tethered Water Source Piggy Back Float Switch for Sump and Sewage Pumps is a replacement switch for sump and sewage pumps. This pump float switch is compatible with various sump pumps. Use of this tethered sump pump float switch is ideal for use in larger diameter pits or basins 18 in. and greater.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Replacement pump float switch for sump and sewage pumps
- When connecting to a pipe or pump, the float needs 4 in. of tether to operate properly; If the float switch is not tethered properly it will not be able to float into an upward position so that the ball bearing inside the switch makes contact to turn the pump on
- In order for the float to operate freely, the basin should be at least 14 in. wide and 16 in. deep; if not, the float could become stuck on the wall of the sump basin
- 8 ft. cord
- Sump pump float switch works with pumps up to 1/2-HP at 120 VAC and 1-HP at 230 VAC
- 115-volt plug attached can be removed for direct wiring
| Brand | Water Source |
|---|---|
| Country of Origin | Imported |
| Compatibility | Works with pumps up to 1/2-HP at 120 VAC and 1-HP at 230 VAC |
| Package Quantity | 1 |
| Primary Color | Black |
| Primary Material | Rubber |
| Product Height | 2.74 in. |
| Product Length | 4 in. |
| Product Weight | 1.49375 lb. |
| Product Width | 2.6 in. |
| Pump Accessory Type | Switches |
| Manufacturer Part Number | WSFSWPB |