Superior Pump 1/2 HP 120V Electric Pre-Assembled Simplex Sewage Pump Kit, 80 GPM
Item # 1176488
Item # 1176488
Superior Pump builds pumps that are truly built to last and are 100% factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 93015, 1/2 HP cast iron submersible sewage pump kit, with tethered float switch, will move water up to 4800 gal. per hour. The easy to assemble kit includes an 18x30 in. basin, premium structural foam cover, air tight molded reusable PVC seal, 4 inlet with snap-in-hub, 2 in. rubber boot check valve and includes 2 in. PVC pipe. This kit is UL/cu listed and CSA certified and backed by a 1 year warranty.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Pump - rugged cast iron construction, tethered float switch, 2 In. NPT discharge, handles 2 In. solids, non-clogging vortex impeller, 10 Ft. power cord with piggy back plug, continuous duty thermally protected split capacitor motor
- Pumps up to 4800 gal. per hour, pumps water up to 25 vertical feet
- Basin - structural foam construction, corrosion resistant, size 18 In. x 30 In., 4 In. inlet hub, 2 In. discharge and vent, 30 gal. capacity, built-in torque stops
- Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal
- Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections
- Snap-in-hub features, high quality rubber construction, fits 4 In. DWV schedule 40/80 pipe, water and vapor tight seal
- Easy to assemble
- 1 Year warranty
- Built in thermal overload protection for safety
- Permanent split capacitor continuous duty motor
- 1 Year Warranty
| Brand | Superior Pump |
|---|---|
| Country of Origin | Imported |
| Amperage | 7.6A |
| Basin Diameter | 18 in. |
| Body Material | Cast iron |
| Compatible Pipe Material | ABS |
| Discharge Connection | Threaded Female |
| Discharge Port Diameter | 2 in. |
| Discharge Rate at 0 ft. | 80 GPM |
| Discharge Rate at 10 ft. | 60 GPM |
| Engine Brand | N/A |
| Engine Displacement | 0 cc |
| Features | Self Priming, Submersible |
| Fuel Capacity | 0 oz. |
| Horsepower | 12 HP |
| Hose Diameter | 0 in. |
| Impeller Material | Thermoplastic |
| Inlet Connection | Threaded Female |
| Inlet Diameter | 2 in. |
| Maximum Flow Rate | 80 GPM |
| Maximum Head Lift | 25 ft. |
| Maximum Operating Pressure | 10.8 PSI |
| Maximum Operating Temperature | 120degF |
| Maximum Solids Diameter | 2 in. |
| Maximum Suction Lift | 25 ft. |
| Minimum Operating Pressure | 10.8 PSI |
| Minimum Operating Temperature | 32degF |
| Oil Capacity | 20 oz. |
| Power Cord Length | 10 ft. |
| Power Type | Electric |
| Product Height | 36 in. |
| Product Length | 22 in. |
| Product Weight | 50 lb. |
| Product Width | 22 in. |
| Pump Mechanism | Centrifugal |
| Motor Type | PSC |
| Switch-Off Height | 8 in. |
| Switch-On Height | 16 in. |
| Voltage | 120V |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | 93015 |