Hobart 1/8 in. x 18-1/8 in. Aluminum Rods, 7-Pack
Hobart 1/8 in. x 18-1/8 in. Aluminum Rods, 7-Pack
Item # 385130399
Stocked & Ready
Get everything you need
Neighbor’s Club Members earn points with purchases.
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
These Hobart Aluminum Rods are low-temperature, self-fluxing welding rods for use on aluminum and magnesium. Applications include irrigation pipe-tubing, carburetor bowls, aluminum boats, outboard motor housings and castings (aluminum and magnesium). Available in a pack of seven rods.
- Aluminum Rods
- Low-temperature, self-fluxing rod for use on aluminum and magnesium
- 700° F melting temperature
| Brand | Hobart |
|---|---|
| Country of Origin | Made in USA |
| Finish | Aluminum |
| Gauge | 8 gauge |
| Package Quantity | 7 |
| Primary Material | Aluminum |
| Product Diameter | 0.125 in. |
| Product Length | 18.125 in. |
| Product Thickness | 0.125 in. |
| Product Weight | 1 lb. |
| Product Width | 0.125 in. |
| Surface Type | Smooth |
| Threaded or Unthreaded | Un-Threaded |
| Warranty | Hobart |
| Manufacturer Part Number | 770206 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: Can these be used on hvac lines
8 hours ago0 Answers
Q: Can these rods be used for a solid repair for holes and cracks on the floor of a aluminum flat bottom jon boat? Will it eventually pop off?
2 months ago1 Answer
- AI-generated, Human-approvedA: Yes, these rods are specifically designed for use on aluminum boats and can be used to repair small cracks and holes. One reviewer successfully used them to repair a boat gunnel, noting that the material flows well and has enough body to bridge small cracks.2 months agoHelpful?
Q: Will these work on a transmission housing
5 months ago1 Answer
- A: Hello, thank you for your question. These aluminum rods are self-fluxing brazing filler rods for aluminum and magnesium. They can be used to braze small repairs on aluminum parts, but they’re not the same as a structural welding rod. For heavy or load-bearing areas like a transmission housing, a proper aluminum welding filler is usually a better choice5 months agoHelpful?
Q: What is the teinsel strength
a year ago1 Answer
- A: Hello, thank you for your question. Per the vendor, "There is no defined tensile strength for this product. It is designed to join any 2 metals that have Zinc or Aluminum as the base metal. Because of this, there are 100’s of combinations that would change the tensile strength based on the 2 base metals."11 months agoHelpful?
Q: Asking again since whoever answered Bulldogs question didn't know what they were talking about. Can this product be used with an arc welding?
a year ago1 Answer
- A: Yes, per the vendor, these are welding rods or welding electrodes.a year agoHelpful?
Q: Can this be used with an electric stick welder
2 years ago1 Answer
- A: If you are able to achieve the 700 degree melting point temperature on the material to be brazed then yes you can use a propane torch. If your torch will not produce enough BTU's to get to the 700 degree pint then it will not work.2 years agoHelpful?
Q: Can you weld thin sheet metal
4 years ago1 Answer
- A: Thin sheet metal can be welded when using the proper technique.4 years agoHelpful?
Q: Can you use this with a propane torch?
7 years ago1 Answer
- A: If you are able to achieve the 700 degree melting point temperature on the material to be brazed then yes you can use a propane torch. If your torch will not produce enough BTU's to get to the 700 degree pint then it will not work.7 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: Can these be used on hvac lines
8 hours ago0 Answers
Q: Can these rods be used for a solid repair for holes and cracks on the floor of a aluminum flat bottom jon boat? Will it eventually pop off?
2 months ago1 Answer
- AI-generated, Human-approvedA: Yes, these rods are specifically designed for use on aluminum boats and can be used to repair small cracks and holes. One reviewer successfully used them to repair a boat gunnel, noting that the material flows well and has enough body to bridge small cracks.2 months agoHelpful?
Q: Will these work on a transmission housing
5 months ago1 Answer
- A: Hello, thank you for your question. These aluminum rods are self-fluxing brazing filler rods for aluminum and magnesium. They can be used to braze small repairs on aluminum parts, but they’re not the same as a structural welding rod. For heavy or load-bearing areas like a transmission housing, a proper aluminum welding filler is usually a better choice5 months agoHelpful?
Q: What is the teinsel strength
a year ago1 Answer
- A: Hello, thank you for your question. Per the vendor, "There is no defined tensile strength for this product. It is designed to join any 2 metals that have Zinc or Aluminum as the base metal. Because of this, there are 100’s of combinations that would change the tensile strength based on the 2 base metals."11 months agoHelpful?
Q: Asking again since whoever answered Bulldogs question didn't know what they were talking about. Can this product be used with an arc welding?
a year ago1 Answer
- A: Yes, per the vendor, these are welding rods or welding electrodes.a year agoHelpful?
Q: Can this be used with an electric stick welder
2 years ago1 Answer
- A: If you are able to achieve the 700 degree melting point temperature on the material to be brazed then yes you can use a propane torch. If your torch will not produce enough BTU's to get to the 700 degree pint then it will not work.2 years agoHelpful?
Q: Can you weld thin sheet metal
4 years ago1 Answer
- A: Thin sheet metal can be welded when using the proper technique.4 years agoHelpful?
Q: Can you use this with a propane torch?
7 years ago1 Answer
- A: If you are able to achieve the 700 degree melting point temperature on the material to be brazed then yes you can use a propane torch. If your torch will not produce enough BTU's to get to the 700 degree pint then it will not work.7 years agoHelpful?
Similar Items
-
Top Rated
-
Top Rated
-
Top Rated
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
-
-
Reviews
- repairs
- functional
- material
- metal
- quality
- turning
- cleaning
- wait time
1 to 4 of 15 Reviews .
1 – 4 of 15 Reviews
Most Recent
St Petersburg, FL
Review 1
5 out of 5 stars.
Easy to use brazing rods
3 years ago
These brazing rods were easy to use. They have a nice strength to them as well.
Sweepstakes EntryYes
Yes, I recommend this product.
Tacoma, Wa
Review 1
5 out of 5 stars.
Perfect for map gas welding
3 years ago
Great for gas welding no equipment require. Makes easy quick repairs
Sweepstakes EntryYes
Yes, I recommend this product.
San Antonio Tx
Review 1
4 out of 5 stars.
It's aluminum, just saying.
3 years ago
First off let me say only the man above rates a 5. With patience these rods will get the job done. Before you run set the correct heat. Probably should run some test runs to be sure.
Yes, I recommend this product.
Virginia
Reviews 5
4 out of 5 stars.
Didn't work well on alumimum casting.
3 years ago
A bit sub-optimum on cast aluminum.
The casting started bleeding alloying metals before the rods would melt and flow.
Probably works well on billet or extrusions.
Yes, I recommend this product.