The HIT 80 Amp Wire Feed 120V MIG Welder Kit is versatile, compact and powerful. Easy to use and easy to carry, this MIG Welder is ideal for jobs big and small. Tackle automotive and industrial projects at home, on the farm, or at the shop. The Welder utilizes a 120V plug, so it can be used at any standard outlet, for convenience and versatility. Weld carbon steel, stainless steel, aluminum, and more with solid and flux cored wire with our without shielding gas. Equipped with advanced thermal overload protection for safe operation. The HIT 80 Amp Wire Feed 120V MIG Welder Kit includes a welding cable and electrode holder, MIG torch, grounding cable with earth clamp, wire spool, welding face shield, and clipping hammer with brush.

• 120 volt power supply can be plugged into any standard outlet
• Advanced overload and thermal protection with indicator light for safety
• Welds stainless steel, aluminum, carbon steel, and more between 1.2mm-3.0mm thick
• Utilizes solid and flux cored wire with or without shielding gas
• Single knob controls the wire feed, output current and output voltage
• Wire feed with maximum speed 2 to 15 m/min
• Compatible with electrode sizes 1/16 to 5/64 inches (MMA 1-6.2.0 MM) and wire diameter MIG .030 to .035 inches
• Plugs into standard 120-volt outlet, single phase, 60 Hz,, 62 volt no load
• Variable amps output MIG 30 to 80 (MMA 20-70A) with MIG duty cycle of 30% at 80A (MMA 70A@30%)
• Synergic output current mode (output current/output volt/wire speed 3-in-1 knob) with steeples adjustment
• Kit includes 6.5 ft. power cord, 5 ft. Earth ground cable with clamp, 6.25 ft. MIG Torch and cable, 6.5 ft. Welding cable with electrode holder, wire spool, face shield, and clipping hammer with brush