A: You should be able to pick the delivery store during checkout on the Tractor supply website. -Matthew

A: There is a 6'4"x5' wide frame available in 2026, but it will continue to use 7' cross braces. -Matthew

A: There is a 6'4"x5' wide frame available in 2026, but it will continue to use 7' cross braces. -Matthew

A: Yes, you can stack another compatible ScaffoldMart set on top of the current one to gain extra height, but you cannot simply add a "foot or two" as a single extension; height is added in full-frame increments (typically 5 feet for this model). The original set already stands at 5 feet high (platform height, working height is about 11 feet).

A: The 5x5 set ships as 2 LTL handling units: a bundle of frames and a pallet of braces, pins, etc. If you order multiple sets, the frames will be combined into a larger bundle and the accessories will fit on the same pallet. The shipping weight will be the weight of the sets , 98.7 lbs. ea, plus a pallet weight of 80 lbs. -Matthew

A: Yes, the set comes with 4 stack pins and the spring rivets that hold them in the top of the frame. -Matthew

A: This scaffold set uses a standard #6 diameter tube. OD is 1 5/8", tube thickness is .090" of a stronger alloy than others use. -Matthew

A: Each set includes 2 cross braces, two 5x5 frames, and 4 stack pins with spring rivets. -Matthew

A: These sets are limited by the OSHA regulations for lateral stability. Please refer to your local OSHA official for guidance; typically, a 3:1 or 4:1 height-to-width ratio is used. Higher stacks may be achieved by securing the sections to a solid structure. We typically do not recommend stacking higher than 10 sections.

A: Yes, this set uses 8" diameter, 1 3/8" stem wheels, available through TSC with our SKU 378SET4. Safety rails can be added, either the female post style that goes over the stack pin, the male style that replaces the stack pin, or the end panel style with double rails for the greatest rigidity.