A: Hi Neighbor- it is not recommended to mix metallic pigments directly into this clear coat.

A: Hi Neighbor- Based on the technical data and product instructions for Majic 1 qt. Clear Coat Lacquer (8-2999), it is not recommended to mix metallic pigments directly into this clear coat.

A: Hi Neighbor- Yes, Majic Clear Coat High Gloss Lacquer can be applied directly over Majic Tractor, Truck & Implement Enamel, provided the enamel is fully cured, typically for at least 7 to 14 days. It is not for direct application over bare metal, primer, or non-Majic paints, as the strong lacquer solvents can cause wrinkling if the base is not fully cured.

A: Hi Neighbor! Majic Tractor, Truck & Implement Primers and Enamels are high solids alkyds that will most often require reduction for spraying. We recommend and 8:1 reduction with Majic Reducer, #8-0750 (8 parts Majict T&I Primer or Finish Enamel). This ratio is a “plus or minus” ratio based on your particular spray equipment, atmospheric conditions at the time of application, and of course, your own personal preferences. Typically gravity fed, and HVLP spray guns may require a greater ratio. Majic Clear Coat is packaged @ spray consistency and reduction is not required, nor recommended. The final coat of Majic Tractor & Implement Enamel must be allowed to cure for 14 days prior to application of Clear Coat, and please read and follow application directions carefully with regard to the recommended applied thickness of the coating, and allowable recoat times.

A: Hi Neighbor- Yes it can be brushed on

A: Hi Neighbor! Please contact the manufacturer.

A: Hi Neighbor! Features Acrylic modified for exceptional protection and durability. Non-yellowing gloss finish. UV resistant - protects against color fading. For use with properly cured (at least 14 days) Majic Tractor, Truck & Implement Enamels. Exterior Use Only.

A: Hi Neighbor! Lacquer can either be sprayed onto a surface (using pretty much any type of air equipment), or can be applied with a brush.

A: Majic Clear Coat High Gloss Lacquer is a ready-to-spray, hard-drying coating that provides a deep gloss to a Majic Tractor & Implement finish, plus provides greater UV resistance than the enamel alone. Majic Clear Coat contains hot solvents that can react with some oil/alkyd coatings causing wrinkling, or lifting. When used with Majic Tractor, Truck & Implement Enamels, it is recommended to allow the final coat of enamel to cure for 2 weeks prior to the application of Clear Coat. Majic Clear Coat is ready-to-spray, and does not require reduction – the use of a catalyst hardener is not recommended with Majic Clear Coat. Majic Clear Coat is designed for use in conjunction with Majic Tractor, Truck & Implement Enamels, and should not be used with other types, or brands, of finishes without testing for compatibility and chemical resistance

A: The surface prep instructions are as follows: Surface must be clean, dry, and free of dust, dirt, oily residue, and grease. Gloss TT&I should be lightly sanded with 400 grit paper or equivalent Scotch Brite Pad. Remove sanding dust by wiping surface with a tack rag or damp cloth. Allow final coat of Majic TT&I to cure for 14 days before applying Majic Clear Coat. Not waiting the full cure time of the enamel may cause lifting and wrinkling of the finish coat. No need to allow extra time after sanding. The product can be applied to the clean surface.