Latexite Foundation Coating
Limited Time Deal
Online Only
Latexite Foundation Coating
Item # 2268403
Notice:
This Item cannot be shipped to AK, HI.
Neighbor’s Club Members earn points with purchases.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Notice:
This Item cannot be shipped to AK, HI.Neighbor’s Club Members earn points with purchases.
Latexite Foundation Coating #901 is an asphalt emulsion based general purpose damp-proofer designed for exterior use in above and below-grade applications. Latexite Foundation Coating is an advanced formula that contains polymer additives for long lasting strength and flexibility. #901 is asphalt based and contains a durable blend of rubber and reinforcing fibers to provide a strong, flexible, crack resistant, waterproof seal. Latexite Foundation Coating #901 has exceptional adhesion to masonry surfaces. Low odor and will not burn or support combustion in a liquid state. Product is black in color and we recommend using a roller to apply (You can use a 3 knot roofing brush as well). Application temperature must be within the minimum and maximum temperatures below for at least 24 hours
- Rubberized
- Fiber reinforced
- Quick setting
- Asphalt emulsion concentration
- Low VOC, no solvents
- Ready to use in exterior applications only
- When used as a foundation coating, allow poured concrete to cure at least 28-days prior to application
- Minimum application temperature: 55 degrees Fahrenheit
- Maximum application temperature: 95 degrees Fahrenheit
| Brand | Latexite |
|---|---|
| Country of Origin | Made in USA |
| Container Size | 5 gal. |
| Coverage Area | 250 sq. ft. |
| Cure Time | 24 - 48 hr. |
| Dry to Touch | 12 hr. |
| Features | Polymer fortified, Low odor, easy soap and water clean up, Crack Resistant formula, Low VOC |
| Indoor/Outdoor | Outdoor |
| Longevity | 0 years |
| Package Quantity | 1 |
| Primary Color | Black |
| Product Height | 16 in. |
| Product Length | 13 in. |
| Product Weight | 55 lb. |
| Product Width | 13 in. |
| Sealant Form | Other |
| Sealant Type | Other |
| Manufacturer Part Number | 3055 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: Is the surface slippery after it dries?
2 months ago1 Answer
- A: Hi Neighbor! Latexite Foundation Coating (specifically the asphalt-based #901) is designed as a damp-proofer, not a walking surface, and can remain slightly soft or tacky after drying.2 months agoHelpful?
Q: Can this be used on asphalt driveway? ?? ??
2 months ago1 Answer
- A: Hi Sammeow! This product could be used on an asphalt driveway.2 months agoHelpful?
Q: Can you use on rv rubber roof?
11 months ago1 Answer
- A: Hello Neighbor, This product is not recommended for RV roofing.11 months agoHelpful?
Q: Do I need to fill cracks prior to applying? If so what type of product should be used?
2 years ago1 Answer
- A: Per the label: PREPARATION: Surfaces must be cleaned, free of dust, surface rust, and loose material. If possible, power wash the surface before applying coating. Use roller to apply product. Use in exterior applications only. Wear protective clothing. Don't apply to wet surfaces. APPLICATION: Apply on a clear warm day with no rain expected for 24 hours. Use roller to spread evenly across surface. Apply when surface temperatures are between 70F and 110F. MIXING MAY BE REQUIRED TO ENSURE PRODUCT UNIFORMITY. DO NOT APPLY DIRECT HEAT/FLAMES OR THIN. When used as a foundation coating, allow poured concrete to cure at least 28 days prior to application. When transporting this product, ensure that the lid is tight and pail is secure and upright. Do not store at temperatures over 100F. Do not freeze.2 years agoHelpful?
Q: How long will this last once applied Used for foundation cmu block sub grade
2 years ago1 Answer
- A: The manufacturer has not provided a specific length of time for this product. In general, given the climate conditions where you live and if it's applied properly, per the directions, foundation covering has the potential to last several years to decades. For more information on this specific coating, please contact the manufacturer at: (203) 272-32212 years agoHelpful?
Q: Is this product paintable?
2 years ago1 Answer
- A: yes2 years agoHelpful?
Q: Is it sound dampening
2 years ago1 Answer
- A: Our records do not have sound dampening listed as a one of the features of the product. For the best answers to all of your questions and tips for use, please contact the manufacturer (203) 272-32212 years agoHelpful?
Q: Will this damage foam block foundation walls(insulated concrete forms)?
2 years ago1 Answer
- A: For the best answers to all of your questions and tips for use, please contact the manufacturer (203) 272-32212 years agoHelpful?
Q: Can this be used on a surface that will be walked on?
2 years ago1 Answer
- A: This is not intended for that use.2 years agoHelpful?
Q: Can you use this on wood deck posts in the ground ?
2 years ago1 Answer
- A: For the best answers to all of your questions and tips for use, please contact the manufacturer (203) 272-32212 years agoHelpful?
1 - 10 of 11 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: Is the surface slippery after it dries?
2 months ago1 Answer
- A: Hi Neighbor! Latexite Foundation Coating (specifically the asphalt-based #901) is designed as a damp-proofer, not a walking surface, and can remain slightly soft or tacky after drying.2 months agoHelpful?
Q: Can this be used on asphalt driveway? ?? ??
2 months ago1 Answer
- A: Hi Sammeow! This product could be used on an asphalt driveway.2 months agoHelpful?
Q: Can you use on rv rubber roof?
11 months ago1 Answer
- A: Hello Neighbor, This product is not recommended for RV roofing.11 months agoHelpful?
Q: Do I need to fill cracks prior to applying? If so what type of product should be used?
2 years ago1 Answer
- A: Per the label: PREPARATION: Surfaces must be cleaned, free of dust, surface rust, and loose material. If possible, power wash the surface before applying coating. Use roller to apply product. Use in exterior applications only. Wear protective clothing. Don't apply to wet surfaces. APPLICATION: Apply on a clear warm day with no rain expected for 24 hours. Use roller to spread evenly across surface. Apply when surface temperatures are between 70F and 110F. MIXING MAY BE REQUIRED TO ENSURE PRODUCT UNIFORMITY. DO NOT APPLY DIRECT HEAT/FLAMES OR THIN. When used as a foundation coating, allow poured concrete to cure at least 28 days prior to application. When transporting this product, ensure that the lid is tight and pail is secure and upright. Do not store at temperatures over 100F. Do not freeze.2 years agoHelpful?
Q: How long will this last once applied Used for foundation cmu block sub grade
2 years ago1 Answer
- A: The manufacturer has not provided a specific length of time for this product. In general, given the climate conditions where you live and if it's applied properly, per the directions, foundation covering has the potential to last several years to decades. For more information on this specific coating, please contact the manufacturer at: (203) 272-32212 years agoHelpful?
Q: Is this product paintable?
2 years ago1 Answer
- A: yes2 years agoHelpful?
Q: Is it sound dampening
2 years ago1 Answer
- A: Our records do not have sound dampening listed as a one of the features of the product. For the best answers to all of your questions and tips for use, please contact the manufacturer (203) 272-32212 years agoHelpful?
Q: Will this damage foam block foundation walls(insulated concrete forms)?
2 years ago1 Answer
- A: For the best answers to all of your questions and tips for use, please contact the manufacturer (203) 272-32212 years agoHelpful?
Q: Can this be used on a surface that will be walked on?
2 years ago1 Answer
- A: This is not intended for that use.2 years agoHelpful?
Q: Can you use this on wood deck posts in the ground ?
2 years ago1 Answer
- A: For the best answers to all of your questions and tips for use, please contact the manufacturer (203) 272-32212 years agoHelpful?
1 - 10 of 11 Questions
Similar Items
-
-
-
Top Rated
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
Items You May Like
-
-
-
-
-
-
Top Rated
-
-
-
-
-
-
Reviews
- price
- application
- durability
- for diy projects
- light
- moisture
- quality
- results
1 to 4 of 18 Reviews .
1 – 4 of 18 Reviews
Most Recent
Kentucky
Review 1
5 out of 5 stars.
Diy and save
9 months ago
Worked and went on as described. Great do it yourself route. Saved $2100. Doing it by hand. Dried overnight and second coating filled in all the light spots looks great.
Yes, I recommend this product.
larwill in
Review 1
4 out of 5 stars.
lextite coating
a year ago
went on smooth .not much mixing .only been on wall few days
SweepstakesYes
Yes, I recommend this product.
Review 1
5 out of 5 stars.
Easy to apply
a year ago
Went on easy with a roller. Took two days to dry due to cooler weather (55-60 degrees). Looks like it should do a great job at keeping out moisture.
South Carolina
Review 1
3 out of 5 stars.
Upstate SC application
2 years ago
Application needs to be somewhat light. Heavy coats crack
SweepstakesYes
Yes, I recommend this product.