Hobart 120V/240V Airforce 27i Plasma Cutter with MVP
Item # 3806510
Hobart Airforce 27i Plasma Cutter with MVP can be used on 120 V or 240 V input power. This plasma cutter clean cuts 3/8 in. steel. Our plasma cutter's dual-voltage capability with MVP allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle. Its wind tunnel technology saves you from replacing parts by preventing abrasive dust and particles from damaging internal components. The Hobart Airforce plasma cutter automatically controls the amount of usage and flow of air or gas so you don't have to.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Dual-voltage capability with MVP (Multi-Voltage Plug) - allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle
- XT30R torch - Increases your comfort with an ergonomic safety trigger
- Wind tunnel technology - Plasma cutter saves you from replacing parts by preventing abrasive dust and particles from damaging internal components
- Fan-on-demand - The fan only runs when needed, reducing the dust and debris that is pulled into your machine
- Power factor correction (PFC) circuitry - PFC expands your work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops
- LVC line voltage compensation - Provides you steady and cleaner-ending cuts by using peak performance power under variable input voltage conditions (15%)
- Internal gas/air filter and regulator - Automatically controls the amount of usage and flow of air or gas so you don't have to
- Starts without high frequency - Protects your unit by not interfering with or damaging controls or computers
- Hobart Airforce plasma cutter draws up to 30% less amperage for the same cutting range as compared to the competition
| Brand | Hobart |
|---|---|
| Country of Origin | Made in USA |
| Airflow Volume | 3 CFM |
| Compatible Metal | Steel |
| Duty Cycle | 200 IPM |
| Features | The AirForce 27i with MVP (multi-voltage plug) technology can be used on 120 V or 240 V input power. Clean cuts 3/8" steel. |
| Ground Clamp Length | 12 ft. |
| Maximum Amperage Output | 30 A |
| Maximum Cutting Thickness | 5/8 in. |
| Maximum Input Amperage | 15 A |
| Maximum Input Frequency | 120 v |
| Maximum Input Voltage | 110/115/120V, 220/230/240 V |
| Maximum Open Circuit Voltage | 400V |
| Minimum Amperage Output | 20A |
| Minimum Generator Power Required | 110V |
| Power Cord Length | 10 ft. |
| Product Height | 11.25 in. |
| Product Length | 8.25 in. |
| Product Weight | 27.6 lb. |
| Product Width | 14.25 in. |
| Torch Length | 12 ft. |
| Warranty | 5/3/1 |
| Phase | Single Phase |
| Work Cable Length | 12 ft. |
| Manufacturer Part Number | 500575 |