Hobart 120V/12A 1/8 in. AirForce 12ci Plasma Cutter with Built-In Air Compressor
Item # 3808889
Item # 3808889
The Hobart AirForce 12ci Plasma Cutter with Built-In Air Compressor runs on 120V input power. This plasma cutter clean cuts 1/8 in. steel. It increases your comfort with an ergonomic safety trigger. This plasma cutter's pilot arc start ensures you a consistent arc start prior to each cut and minimizes tip burnout. The Hobart AirForce plasma cutter comes with a fan that only runs when needed, reducing the dust and debris that is pulled into your machine.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on welders? Check out our guide on welding in the product documents section.
- AirForce plasma cutter with built-in air compressor - No need for you to purchase or transport additional compressor
- Inverter design - A compact 26.7 lb. allows you to transport easily but offer you powerful cutting ability
- XT12R torch - Increases your comfort with an ergonomic safety trigger
- Powered by 120 V, 20 A circuit - Runs on your household power
- Fan-on-demand - The fan only runs when needed, reducing the dust and debris that is pulled into your machine
- Pilot arc start - Ensures you a consistent arc start prior to each cut and minimizes tip burnout
- Diagnostic lights - LED lights let you know when the system indicates power, temperature, and torch readiness; eliminate unnecessary downtime
- Thermal overload protection - No matter what environment you are in, it will withstand tough working conditions
- The internal piston-driven air compressor allows high system portability
- Duty cycle will increase as environmental temperature decreases
- Hobart plasma cutter is rated for 35% duty cycle at 104 degree Fahrenheit
| Brand | Hobart |
|---|---|
| Country of Origin | Made in USA |
| Airflow Volume | 2.5 CFM |
| Compatible Metal | Steel |
| Duty Cycle | 100 IPM |
| Features | The AirForce 12ci with built-in air compressor runs on 120V input power. Clean cuts 1/8 in. steel. |
| Ground Clamp Length | 12 ft. |
| Maximum Amperage Output | 0 Amps |
| Maximum Cutting Thickness | 1/4 in. |
| Maximum Input Amperage | 20A |
| Maximum Input Frequency | 120 V |
| Maximum Input Voltage | 110/115/120V |
| Maximum Open Circuit Voltage | 375V |
| Minimum Generator Power Required | 110V |
| Power Cord Length | 7 ft. |
| Product Height | 10 in. |
| Product Length | 8.25 in. |
| Product Weight | 25.1 lb. |
| Product Width | 13 in. |
| Torch Length | 12 ft. |
| Warranty | N/A |
| Phase | Single Phase |
| Work Cable Length | 12 ft. |
| Manufacturer Part Number | 500564 |