$10.99
Harris Farms Poultry Watering Cups, 2-Pack
Harris Farms Poultry Watering Cups, 2-Pack
Item # 1149374
Stocked & Ready
$10.99
Spend $49.99 to unlock free delivery!
Get everything you need
Neighbor’s Club Members earn points with purchases.
$10.99
Spend $49.99 to unlock free delivery!
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The Harris Farms Poultry Watering Cups allow you to create your own watering system using a plastic container or PVC pipe. These watering cups come in a pack of 2. Their nipple stems release water only when chickens drink. One cup can accommodate up to 12 chickens. The Harris Farms poultry watering cups can be used with a gravity flow system and they do not connect to a pressure water supply. Chickens will typically train themselves to use these cups in minutes once other water sources are removed. They support both side and bottom mounting. To install, drill a 3/8 in. hole into your desired water source and screw in the watering cups.100% Satisfaction Guaranteed
- Plastic poultry watering cups are easy to install
- Nipple stems release water automatically when chickens drink
- Should be used only with a gravity flow system and never connected to a pressurized water supply
- Harris Farms watering cups, made from BPA free plastic
| Brand | Harris Farms |
|---|---|
| Country of Origin | Made in USA |
| Animal Life Stage | All Life Stages |
| Capacity | 12 chickens per cup |
| Primary Color | Red |
| Primary Material | Plastic |
| Product Height | 1.85 in. |
| Product Length | 1.57 in. |
| Product Weight | 0.85 lb. |
| Product Width | 3.33 in. |
| Warranty | 100% Satisfaction Guaranteed |
| Manufacturer Part Number | 1000304 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 37 Questions
Newest questions
Q: What size drill bit
17 hours ago1 Answer
- AI-generated, Human-approvedA: To install these watering cups, you should drill a 3/8 inch hole into your desired water source. Some users have also suggested using a 5/16 inch or 11/32 inch bit to achieve a tighter fit.3 hours agoHelpful?
Q: Do these require a watertight lid to prevent leaking at the drilled hole?
8 days ago1 Answer
- AI-generated, Human-approvedA: No, these watering cups are designed for use with gravity flow systems and do not require a watertight lid to prevent leaks at the installation site. To ensure a watertight connection at the drilled hole, you can use plumber's tape on the threads or a silicone sealant around the joint.8 days agoHelpful?
Q: Do the cups automatically fill up with water?
a month ago1 Answer
- A: Howdy neighbor! Harris Farms Poultry Watering Cups do not automatically fill up with water on their own, but instead operate on an on-demand system. Your chickens must manually peck or nudge the small yellow stem inside the cup to open the valve and release the water.a month agoHelpful?
Q: What type plastic are these made from?
a month ago1 Answer
- A: Howdy neighbor! The Harris Farms Poultry Watering Cups are made from a high-quality, durable polyvinyl chloride (PVC) plastic. This specific formulation is explicitly engineered to be 100% BPA-free to guarantee the long-term safety and health of your flock.a month agoHelpful?
Q: Mine fills up when the flapper goes side to side not when it goes down. Is this correct?
a year ago1 Answer
- A: Hello, thank you for your question. Yes, that is correct. The cup is designed to fill when the flapper is nudged side to side, which activates the internal valve. Pressing down may not trigger water flow. This is a normal and intentional design.a year agoHelpful?
Q: Is there steps to take when cup does not refill?
2 years ago1 Answer
- A: Hi, Great question! Please use the information below for a trouble shooting session. ***Harris Farms / MannaPro**** https://www.mannapro.com/ 800-690-99082 years agoHelpful?
Q: I found a 1/8" FPT PVC Tee (SCH 40) fitting. Will the waterer thread into this fitting.
3 years ago1 Answer
- A: Hi there! The thread size for the poultry watering cups is equivalent to the screw size M10-1.0. Unfortunately, we are unable to advise on the fitting of the specific measurements provided.3 years agoHelpful?
Q: Does this have to sit on the ground or can it be hung?
3 years ago1 Answer
- A: HI, Yes they can be hung.3 years agoHelpful?
Q: Will these work for rabbits?
4 years ago1 Answer
- A: This product was designed for poultry.4 years agoHelpful?
Q: Are they rated for faucet water pressure?
4 years ago1 Answer
- A: No, they are not.4 years agoHelpful?
1 - 10 of 37 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 37 Questions
Newest questions
Q: What size drill bit
17 hours ago1 Answer
- AI-generated, Human-approvedA: To install these watering cups, you should drill a 3/8 inch hole into your desired water source. Some users have also suggested using a 5/16 inch or 11/32 inch bit to achieve a tighter fit.3 hours agoHelpful?
Q: Do these require a watertight lid to prevent leaking at the drilled hole?
8 days ago1 Answer
- AI-generated, Human-approvedA: No, these watering cups are designed for use with gravity flow systems and do not require a watertight lid to prevent leaks at the installation site. To ensure a watertight connection at the drilled hole, you can use plumber's tape on the threads or a silicone sealant around the joint.8 days agoHelpful?
Q: Do the cups automatically fill up with water?
a month ago1 Answer
- A: Howdy neighbor! Harris Farms Poultry Watering Cups do not automatically fill up with water on their own, but instead operate on an on-demand system. Your chickens must manually peck or nudge the small yellow stem inside the cup to open the valve and release the water.a month agoHelpful?
Q: What type plastic are these made from?
a month ago1 Answer
- A: Howdy neighbor! The Harris Farms Poultry Watering Cups are made from a high-quality, durable polyvinyl chloride (PVC) plastic. This specific formulation is explicitly engineered to be 100% BPA-free to guarantee the long-term safety and health of your flock.a month agoHelpful?
Q: Mine fills up when the flapper goes side to side not when it goes down. Is this correct?
a year ago1 Answer
- A: Hello, thank you for your question. Yes, that is correct. The cup is designed to fill when the flapper is nudged side to side, which activates the internal valve. Pressing down may not trigger water flow. This is a normal and intentional design.a year agoHelpful?
Q: Is there steps to take when cup does not refill?
2 years ago1 Answer
- A: Hi, Great question! Please use the information below for a trouble shooting session. ***Harris Farms / MannaPro**** https://www.mannapro.com/ 800-690-99082 years agoHelpful?
Q: I found a 1/8" FPT PVC Tee (SCH 40) fitting. Will the waterer thread into this fitting.
3 years ago1 Answer
- A: Hi there! The thread size for the poultry watering cups is equivalent to the screw size M10-1.0. Unfortunately, we are unable to advise on the fitting of the specific measurements provided.3 years agoHelpful?
Q: Does this have to sit on the ground or can it be hung?
3 years ago1 Answer
- A: HI, Yes they can be hung.3 years agoHelpful?
Q: Will these work for rabbits?
4 years ago1 Answer
- A: This product was designed for poultry.4 years agoHelpful?
Q: Are they rated for faucet water pressure?
4 years ago1 Answer
- A: No, they are not.4 years agoHelpful?
1 - 10 of 37 Questions
Similar Items
-
-
-
-
Top Rated
-
-
-
-
-
-
-
-
Reviews
Summary of Reviews
The product has mixed reviews. Some customers found the cups easy to use and effective at providing clean water for their chickens. However, the majority of reviews indicate significant issues, including leaks, chickens having difficulty triggering the cups, and poor quality and durability. Many cus...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
Most Helpful Favorable Review
5 out of 5 stars.
confusion in other reviews explained...
8 years ago
These cups work terrific. There is confusion in other reviews about the cups NOT refilling after the chicken drinks the water. This is how they work: Chicken pecks at the yellow water trigger and the water flows into the cup, chicken drinks the water. The cups do NOT just refill because they are empty. They are not supposed to. Another chicken comes along, pecks at the trigger, water flows out and they drink the water and then walk away. You may periodically find water left in the cups because the hen did not drink it all before walking away. They only release water when a hen moves the trigger. Not when the cup is empty. Hens will learn where the water comes from and activate the trigger as needed. They do work and they work terrific.
29 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
Did not work well.
10 years ago
I bought this product initially thinking it was a float system in that so long as water was available to the assembly, the water level in the cups would remain full until the chickens drank down the level, thereby lowering the float and opening the valve which would allow more water to enter the cups. Well, I was wrong and this is definitely not the case. The yellow stem has a spring on the cup side which holds tension on a rubber O-Ring that's attached to the yellow stem on the back side of the black fitting. So in theory, when "bumped" by the chickens the yellow stem is supposed to cam slightly breaking the O-Rings seal against the black fitting, allowing water to dribble into the cup. It does not work effectively. Unless your chickens grab the yellow stem, pull it up, and hold it there for about 5 seconds, they aren't going to get water. I had four cups screwed into a 5 gallon bucket, and tried varying depths of water over the course of a week from barely above the cup lines at the bottom of the bucket, to as much as 2.5 gallons, but all four cups yielded the same results... always empty. Even manually filling the cups for the chickens was difficult, as pressing down on the stem did very little, and I had to pull up to get any appreciable water flow. These were horizontal mounted, and all troubleshooting, and cleaning was performed. I am abandoning the cups and will try the water nipples as an alternative. I hope this review saves someone the wasted time and disappointment that I encountered.
18 people found this helpful
Show Reviews:
Customer Images and Videos
- purchase
- price
- installation
- instructions
- quality
- small
- satisfaction
- large
1 to 4 of 163 Reviews .
1 – 4 of 163 Reviews
Most Recent
Review 1
1 out of 5 stars.
If only they worked
2 months ago
Got them for our chickens, they would peck the yellow thing but nothing ever came out, only worked if I held it down. Great concept bad execution.
No, I do not recommend this product.
Reviews 2
5 out of 5 stars.
using poultry watering cuts for quail
5 months ago
after watching several youtube, I decided to try these cups for the quail in my holding
pen. I used them with a 5 gallon bucket. The ease of their installation along with the amount of water held in the bucket, made my watering so much easier.
SweepstakesYes
Review 1
5 out of 5 stars.
Might have to show them first
7 months ago
I found this to be a very good system. I put 6 cups on a 5 gallon bucket, put a hole in the lid, dropped a water heater coil in the bucket, snapped the lid on and plugged it in! -5° and they have water. The cups fill when the chickens move the yellow lever, I have 25 chickens and they all seem to be happy taking turns to get a drink. The only thing I can say to the folks who claim the chickens aren’t getting water… I did have to show a couple of my hens how to use it, but they got the hang of it after a day or so and now all works great!
Reviews 6
1 out of 5 stars.
Broke Quickly
8 months ago
The little stopper broke after only a couple months and I wasted so much water before I realized what was going on. I wouldn't get these. It's very disappointing to think i was doing a good thing for my flock and it breaks.
No, I do not recommend this product.