DEWALT 1.9 hp 30 gal. Oil-Free Portable Vertical Air Compressor
Limited Time Deal
Online Only
DEWALT 1.9 hp 30 gal. Oil-Free Portable Vertical Air Compressor
Item # 1196336
$629.99
Sale
Was$699.99
Save $70.00
or
or
Buy Air Compressor Get 20% Off Air Compressor accessorie
Neighbor’s Club Members earn points with purchases.
Limited Time Deal
Online Only
DEWALT 1.9 hp 30 gal. Oil-Free Portable Vertical Air Compressor
Item # 1196336
Buy Air Compressor Get 20% Off Air Compressor accessorie
$629.99
Sale
Was$699.99
Save $70.00
or
or
$53/mo.† suggested payments with 12 Months Financing or earn $31 in Rewards+ on this purchase.
This item is available online only
Delivery to
For delivery, this item requires a Big & Bulky handling fee.
Neighbor’s Club Members earn points with purchases.
This DeWALT 30 gal. Oil-Free Portable Air Compressor offers a low-maintenance choice for anyone who needs a portable option. Engineered with oil-free, direct-drive operation, there are no belts to tighten or change and the need to add, change or dispose of oil is eliminated. The portable air compressor features a patented pump design with a two-piece cooling system that increases cooling efficiencies, lowers operating temperatures and extends the life of the pump. The air compressor provides the highest CFM output for direct-drive class compressors and includes a 30 gal. vertical tank with a long-lasting induction motor for maximum performance and reliability. Certified by both UL and CSA for quality and safety, the air compressor has a running horsepower of 1.9. It also comes backed by a 1-year limited warranty.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on air compressors? Check out our air compressor FAQs in the product documents section.
- Low maintenance, oil-free, direct drive operation
- Patented pump design with two-piece cooling system increases cooling efficiencies and lowers operating temperatures
- High flow regulator in the portable air compressor provides maximum air flow for peak tool performance
- 30 gal. vertical tank with a long-lasting induction motor for maximum performance and reliability
- 120V air compressor plugs into standard outlet for quick and easy use
- Fully assembled and ready to use
- Equipped with high flow regulator, tank and tool pressure gauges, quick coupler, on/off switch, wheels and handle with grip
- Backed by a 1-year limited warranty
- Easy to start oil-free portable air compressor is able to drive high pump performance helps to ensure trouble-free operation
- Provides highest CFM output for direct-drive class
- Certified by both UL and CSA for quality and safety
| Brand | DEWALT |
|---|---|
| Country of Origin | Made in USA |
| Airflow Volume | 7.7 CFM |
| Air Outlet Size | 3/8 in. |
| Amperage | 15A |
| Compressor Horsepower | 1.9 HP |
| Lubrication Type | Oil Less |
| Compressor Maximum PSI | 155 PSI |
| Compressor Tank Capacity | 30 gal |
| Compressor Voltage | 120V |
| Decibel Rating | 82 dBA |
| Drain System | Multi-turn drain valve |
| Drive Type | Direct drive |
| Features | Handles Included, Oil Free Compressor |
| Number Of Power Speeds | Single |
| Number Of Wheels | 2 |
| Power Type | Electric |
| Primary Color | Yellow |
| Primary Material | Steel |
| Product Height | 51 in. |
| Product Length | 25 in. |
| Product Weight | 156 lb. |
| Product Width | 24 in. |
| Pump Material | Cast iron |
| Stage Type | Single-Stage |
| Tank Fill Time | 7 min. |
| Tank Style | Vertical |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | DXCMLA1983012 |
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 18 Questions
Newest questions
Q: can this run a plasma cutter that needs 5cfm at 80psi
3 years ago1 Answer
- A: This product delivers 7.7 CFM at 40 PSI and 6.0 CFM at 90 PSI.3 years agoHelpful?
Q: will this compressor support a HVLP spray gun ?
5 years ago1 Answer
- A: Most HVLP spray guns operate in the 40 PSI area. This DEWALT 30 gallon 155 PSI air compressor creates 7.7 SCFM at 40 PSI. You will need to find a HVLP spray gun that requires 7.7 SCFM or less to operate it on this air compressor. Also, while this compressor will most likely operate a HVLP paint spray gun, it is recommended it be used intermittently for this application. It will operate the spray gun for smaller hobby type jobs or paint jobs where you don't require continuous use for extended periods of time. For tasks like automotive painting, it is better to use a 60 gallon or larger air compressor that can handle longer periods of run time without interruption.5 years agoHelpful?
Q: I need a compressor for my Miller 375x plasma cutter ... I am working in my garage, in a single family home.. need something that can handle the job but also not too loud . Can you recommend a good portable compressor?
5 years ago2 Answers
- A: This 30 gallon compressor has a decibel rating of 82 dBA. It delivers 7.7 SCFM @ 40 PSI and 6.0 SCFM @ 90 PSI, with a max working pressure of 155 PSI.Please consult your plasma cutter specifications to see if this compressor can meet the demand.5 years agoHelpful?
Q: What is the maximum consecutive amount of hours you can run this compressor in a 24 hour period? Or how long ca. You run this machine before it needs a break to cool off?
6 years ago1 Answer
- A: This compressor is rated at a 50% duty cycle. We recommend that the unit run no more than 30 minutes on & then 30 minutes off. If you are looking for a compressor to run continuously then please consider an industrial two-stage compressor.6 years agoHelpful?
Q: What is the required electrical outlet
7 years ago1 Answer
- A: This unit is rated at 115 volt, 15 amp standard household current. If you are using fuses, be sure they are time delay fuses. It is best that nothing else be plugged into this same circuit, as an induction air compressor motor will draw a good deal of current upon start up. Use of an extension cord is not recommended.7 years agoHelpful?
Q: Is this compressor suitable for sand blasting?
7 years ago2 Answers
- A: Because a sandblaster is considered a continuously operating air tool, it does require quite a bit of constant, continuous air flow to support it. Typically for a larger job, an 80 gallon compressor is best suited for sandblasting needs. If, however, your project is smaller more of a small hobby project, this may work for you, although it will take longer to accomplish. Note: Always check the SCFM air delivery requirements of your air tool and compare them to the air out put of the compressor. Feel free to contact 1-888-895-4549 for additional questions suited to your particular project.7 years agoHelpful?
Q: what is the life expectancy of the pump in hours?
7 years ago1 Answer
- A: Thank you for your interest of the DEWALT 30 gallon air compressor. To answer your question, the life expectancy of the compressor pump depends on the environment you are operating the compressor within. For example, pump life will be extended if you operate the compressor in a clean environment and follow recommended maintenance (i.e. drain the tank). If the environment is not clean and is operated in a dusty/dirty environment, operated in a high humid environment, the life expectancy of the pump will be less. Please contact MAT Customer Care @ (888) 895-4549 as we would like to better understand your work environment to better answer your question.7 years agoHelpful?
Q: Want to use for multiple purposes, primarily cut-off, grinding, sanding and painting. Although not intended for daily use but for the above purposes w/ attachments rated within PSI and CFM ranges, will this do the job?
8 years ago2 Answers
- A: The cut off tool, grinders & sanders are continuously operating air tools and as such require quite a bit of air. So if used in a daily application, a larger tank such as a 60 or 80 gallon would be necessary so you have an adequate air supply. If it is to be used strictly for an occasional small project, this unit should work but you may need to wait for the compressor to pump back up occasionally - again due to the grinders & sanders needing quite a bit of air.8 years agoHelpful?
Q: Can this compressor perform an irrigation blow out?
8 years ago1 Answer
- A: This really depends on the length of pipe and size of system. The manufacturer or installer of the irrigation system would generally have a recommendation as to what is needed.8 years agoHelpful?
Q: How does this perform in the cold, say 15-20 degree F?
8 years ago1 Answer
- A: This air compressor is actually oil free, so you would not have an issue with the oil being thick or sluggish at below freezing temperatures. If the unit is stored constantly at below freezing, you would need to allow it to warm up in order to properly drain any moisture or condensation forming in the tank.8 years agoHelpful?
1 - 10 of 18 Questions
Q&As
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 18 Questions
Newest questions
Q: can this run a plasma cutter that needs 5cfm at 80psi
3 years ago1 Answer
- A: This product delivers 7.7 CFM at 40 PSI and 6.0 CFM at 90 PSI.3 years agoHelpful?
Q: will this compressor support a HVLP spray gun ?
5 years ago1 Answer
- A: Most HVLP spray guns operate in the 40 PSI area. This DEWALT 30 gallon 155 PSI air compressor creates 7.7 SCFM at 40 PSI. You will need to find a HVLP spray gun that requires 7.7 SCFM or less to operate it on this air compressor. Also, while this compressor will most likely operate a HVLP paint spray gun, it is recommended it be used intermittently for this application. It will operate the spray gun for smaller hobby type jobs or paint jobs where you don't require continuous use for extended periods of time. For tasks like automotive painting, it is better to use a 60 gallon or larger air compressor that can handle longer periods of run time without interruption.5 years agoHelpful?
Q: I need a compressor for my Miller 375x plasma cutter ... I am working in my garage, in a single family home.. need something that can handle the job but also not too loud . Can you recommend a good portable compressor?
5 years ago2 Answers
- A: This 30 gallon compressor has a decibel rating of 82 dBA. It delivers 7.7 SCFM @ 40 PSI and 6.0 SCFM @ 90 PSI, with a max working pressure of 155 PSI.Please consult your plasma cutter specifications to see if this compressor can meet the demand.5 years agoHelpful?
Q: What is the maximum consecutive amount of hours you can run this compressor in a 24 hour period? Or how long ca. You run this machine before it needs a break to cool off?
6 years ago1 Answer
- A: This compressor is rated at a 50% duty cycle. We recommend that the unit run no more than 30 minutes on & then 30 minutes off. If you are looking for a compressor to run continuously then please consider an industrial two-stage compressor.6 years agoHelpful?
Q: What is the required electrical outlet
7 years ago1 Answer
- A: This unit is rated at 115 volt, 15 amp standard household current. If you are using fuses, be sure they are time delay fuses. It is best that nothing else be plugged into this same circuit, as an induction air compressor motor will draw a good deal of current upon start up. Use of an extension cord is not recommended.7 years agoHelpful?
Q: Is this compressor suitable for sand blasting?
7 years ago2 Answers
- A: Because a sandblaster is considered a continuously operating air tool, it does require quite a bit of constant, continuous air flow to support it. Typically for a larger job, an 80 gallon compressor is best suited for sandblasting needs. If, however, your project is smaller more of a small hobby project, this may work for you, although it will take longer to accomplish. Note: Always check the SCFM air delivery requirements of your air tool and compare them to the air out put of the compressor. Feel free to contact 1-888-895-4549 for additional questions suited to your particular project.7 years agoHelpful?
Q: what is the life expectancy of the pump in hours?
7 years ago1 Answer
- A: Thank you for your interest of the DEWALT 30 gallon air compressor. To answer your question, the life expectancy of the compressor pump depends on the environment you are operating the compressor within. For example, pump life will be extended if you operate the compressor in a clean environment and follow recommended maintenance (i.e. drain the tank). If the environment is not clean and is operated in a dusty/dirty environment, operated in a high humid environment, the life expectancy of the pump will be less. Please contact MAT Customer Care @ (888) 895-4549 as we would like to better understand your work environment to better answer your question.7 years agoHelpful?
Q: Want to use for multiple purposes, primarily cut-off, grinding, sanding and painting. Although not intended for daily use but for the above purposes w/ attachments rated within PSI and CFM ranges, will this do the job?
8 years ago2 Answers
- A: The cut off tool, grinders & sanders are continuously operating air tools and as such require quite a bit of air. So if used in a daily application, a larger tank such as a 60 or 80 gallon would be necessary so you have an adequate air supply. If it is to be used strictly for an occasional small project, this unit should work but you may need to wait for the compressor to pump back up occasionally - again due to the grinders & sanders needing quite a bit of air.8 years agoHelpful?
Q: Can this compressor perform an irrigation blow out?
8 years ago1 Answer
- A: This really depends on the length of pipe and size of system. The manufacturer or installer of the irrigation system would generally have a recommendation as to what is needed.8 years agoHelpful?
Q: How does this perform in the cold, say 15-20 degree F?
8 years ago1 Answer
- A: This air compressor is actually oil free, so you would not have an issue with the oil being thick or sluggish at below freezing temperatures. If the unit is stored constantly at below freezing, you would need to allow it to warm up in order to properly drain any moisture or condensation forming in the tank.8 years agoHelpful?
1 - 10 of 18 Questions
Similar Items
-
-
-
-
-
-
Top Rated
-
-
-
-
-
-
Items You May Like
-
-
Top Rated
-
-
-
-
-
-
-
-
-
-
Customers Also Bought
Reviews
- purchase
- noise level
- satisfaction
- volume
- functional
- measuring
- parking
- price
1 to 4 of 28 Reviews .
1 – 4 of 28 Reviews
Most Recent
Review 1
2 out of 5 stars.
Measured at >88 decibles
a year ago
Works but is way louder than the advertised decible rating
SweepstakesYes
No, I do not recommend this product.
Sacramento, CA
Review 1
5 out of 5 stars.
So far so good!
a year ago
So far so good! I did buy the petcock valve extender to make it easier to open.
SweepstakesYes
Review 1
5 out of 5 stars.
DeWalt 1.9 HP 30gal Air Compressor
a year ago
The purchase process of my DeWalt air compressor was smooth with no issues. The truck driver delivered it within 30 minutes of the phone call, and placed it right in my garage. I am very happy with this compressor. I don't have leaks or any other functionality issues. Also, it is very good on noise level in my opinion. It is slightly smaller than my previous 40 gallon Craftsman, which I had to leave with my previous home sale, and is no longer sold. I have used the DeWalt for a couple of weeks and so far, easily provides the necessary air to run all my tools. I am very pleased with the purchase, and would recommend it and TSC, if you are looking for a great mid-range mobile compressor with lots of capability.
SweepstakesYes
Vanceburg ky
Reviews 3
5 out of 5 stars.
I Owen a lot of dewalt products and I believe the
2 years ago
Dewalt is. A great product and name
SweepstakesYes
Yes, I recommend this product.