$169.99
CountyLine 6 in. Auger for Post Hole Diggers
CountyLine 6 in. Auger for Post Hole Diggers
Item # 210023899
$169.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
$169.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 6/28/26.
Shopping at
Grassland (franklin) TN
Delivery to
Pickup Nearby at FRANKLIN TN(6.7) miles Free
Pickup Later at Franklin TN
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Dig up post holes easily with the CountyLine 6 in. Auger for Post Hole Diggers. This impressive 6 in. auger is for tractor-mounted post hole diggers. It has a spiral point and replaceable carbide cutting edges. The 48 in. cutting depth makes it easy to bore sufficient holes. The auger is crafted from strong steel and boasts a 1 year warranty.
- Cat 1 & Cat 2 hitch-type post hole diggers
- 6 in. auger with spiral point and replaceable carbide cutting edges
- Bore 6 in. dia. holes in earth
- 6 in. dia. Earth Auger
- 48 cutting depth
| Brand | CountyLine |
|---|---|
| Country of Origin | Imported |
| Auger Diameter | 6 in. |
| Auger Length | 48 in. |
| Auger Material | Steel |
| Auger Speed | 0 rpm |
| Boom Diameter | 0 in. |
| Boom Pole Shape | N/A |
| Compatibility | Cat 1 & Cat 2 hitch-type |
| Features | No additional features |
| Gearbox Ratio | 0 N/A |
| Hitch Type | Category 2 |
| Lift Capacity | 0 lb. |
| Maximum Tractor Horsepower | 200 hp |
| Minimum Tractor Horsepower | 50 hp |
| Number Of Lifting Loops | 0 |
| Primary Material | Steel |
| Product Height | 6 in. |
| Product Length | 48 in. |
| Product Weight | 34 lb. |
| Product Width | 6 in. |
| Recommended Auger Part Number | N/A |
| Warranty | 1 Year |
| Manufacturer Part Number | 23-040 |
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 43 Questions
Newest questions
Q: Will the 6in auger bit fit a 2006 kubota L2800DT-F tractor
a month ago1 Answer
- A: Yes, this 6-inch auger is compatible with Category 1 and Category 2 hitch-type post hole diggers, which are commonly used on tractors like the Kubota L seriesa month agoHelpful?
Q: Can I purchase a bit for this auger? My bit broke off one side and I lost it in one of many post holes I was drilling?
4 months ago1 Answer
- A: Hi Neighbor! Yes, you can replace the cutting components on a CountyLine 6 in. auger from Tractor Supply. If only the cutting edge or tip broke off, you can purchase a replacement carbide cutting edge (often part number S24122200) that hooks on above the screw point rather than replacing the entire 6-inch auger bit.4 months agoHelpful?
Q: Will the male round shaft fit the adapter hex Heavy Duty Auger Adapter (2inches Female Hex to 2-9/16inches Male Round)???
11 months ago1 Answer
- A: It is not recommended to mix and match shaft styles. These augers are designed to be used with round male shafts.11 months agoHelpful?
Q: Will this fit a howse auger
a year ago1 Answer
- A: Unfortunately, I have no data for the Howse post hole diggers so I can’t say if the CountyLine auger will fit.a year agoHelpful?
Q: Is the bit connection round or hex?
a year ago1 Answer
- A: The connection for the augurs is round.a year agoHelpful?
Q: what is the driver shaft diameter that the augur mounts to?
a year ago1 Answer
- A: The 6in Auger has a 2 inch shaft and uses a ½ in. x 3 in. grade 5 shear bolt.a year agoHelpful?
Q: size of the connection to the auger motor?
2 years ago1 Answer
- A: The connection point for the augur is just over 2”.2 years agoHelpful?
Q: What is the part number for the cutting edges
3 years ago1 Answer
- A: The part number for the auger teeth could change depending upon how the flutes on the auger are configured. If the auger has to bolts / hole in the flutes they will need part number S24056700 If there is only one hole / bolt in the flutes they will need part number S24122200.3 years agoHelpful?
Q: What is the bolt size to attach to gear box?
3 years ago1 Answer
- A: 6in Auger has a 2 inch shaft and uses a ½ in. x 3 in. grade 5 shear bolt.3 years agoHelpful?
Q: Does county line stand behind their augers. I purchased mine 2 days ago and while digging the first hole one of the teeth bent down so it is in line with the shaft. Was using a low power tractor and seems like this should have not been an issue.
3 years ago1 Answer
- A: Please contact Customer Service at (888) 376-9601 available Monday-Friday 8am-8pm (EST), Saturday 8am-5pm (EST), so we can better assist you.3 years agoHelpful?
1 - 10 of 43 Questions
Q&As
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 43 Questions
Newest questions
Q: Will the 6in auger bit fit a 2006 kubota L2800DT-F tractor
a month ago1 Answer
- A: Yes, this 6-inch auger is compatible with Category 1 and Category 2 hitch-type post hole diggers, which are commonly used on tractors like the Kubota L seriesa month agoHelpful?
Q: Can I purchase a bit for this auger? My bit broke off one side and I lost it in one of many post holes I was drilling?
4 months ago1 Answer
- A: Hi Neighbor! Yes, you can replace the cutting components on a CountyLine 6 in. auger from Tractor Supply. If only the cutting edge or tip broke off, you can purchase a replacement carbide cutting edge (often part number S24122200) that hooks on above the screw point rather than replacing the entire 6-inch auger bit.4 months agoHelpful?
Q: Will the male round shaft fit the adapter hex Heavy Duty Auger Adapter (2inches Female Hex to 2-9/16inches Male Round)???
11 months ago1 Answer
- A: It is not recommended to mix and match shaft styles. These augers are designed to be used with round male shafts.11 months agoHelpful?
Q: Will this fit a howse auger
a year ago1 Answer
- A: Unfortunately, I have no data for the Howse post hole diggers so I can’t say if the CountyLine auger will fit.a year agoHelpful?
Q: Is the bit connection round or hex?
a year ago1 Answer
- A: The connection for the augurs is round.a year agoHelpful?
Q: what is the driver shaft diameter that the augur mounts to?
a year ago1 Answer
- A: The 6in Auger has a 2 inch shaft and uses a ½ in. x 3 in. grade 5 shear bolt.a year agoHelpful?
Q: size of the connection to the auger motor?
2 years ago1 Answer
- A: The connection point for the augur is just over 2”.2 years agoHelpful?
Q: What is the part number for the cutting edges
3 years ago1 Answer
- A: The part number for the auger teeth could change depending upon how the flutes on the auger are configured. If the auger has to bolts / hole in the flutes they will need part number S24056700 If there is only one hole / bolt in the flutes they will need part number S24122200.3 years agoHelpful?
Q: What is the bolt size to attach to gear box?
3 years ago1 Answer
- A: 6in Auger has a 2 inch shaft and uses a ½ in. x 3 in. grade 5 shear bolt.3 years agoHelpful?
Q: Does county line stand behind their augers. I purchased mine 2 days ago and while digging the first hole one of the teeth bent down so it is in line with the shaft. Was using a low power tractor and seems like this should have not been an issue.
3 years ago1 Answer
- A: Please contact Customer Service at (888) 376-9601 available Monday-Friday 8am-8pm (EST), Saturday 8am-5pm (EST), so we can better assist you.3 years agoHelpful?
1 - 10 of 43 Questions
Similar Items
-
-
-
-
Top Rated
-
-
-
-
-
-
-
-
Items You May Like
-
-
-
-
Top Rated
-
-
-
-
-
-
-
-
Customers Also Bought
-
-
-
-
-
-
-
-
Top Rated
-
-
-
-
Reviews
- purchase
- price
- drilling
- small
- size
- quality
- satisfaction
- cutting
1 to 4 of 687 Reviews .
1 – 4 of 687 Reviews
Most Recent
Anonymous
Texas
Review 1
1 out of 5 stars.
Weak metal: Bends easily.
a month ago
The shaft on this auger bent easily on the first use when it got stuck. I would not recommend buying this product.
SweepstakesYes
No, I do not recommend this product.
Review 1
1 out of 5 stars.
Awful
6 months ago
This auger bit is junk. I barely did 30 holes with it within a day of purchase and it started to fall apart. Cleary they use a low carbon non heat treated steel that rips and distorts
No, I do not recommend this product.
TN
Review 1
1 out of 5 stars.
poor quality, weak thin metal spiral
8 months ago
spiral broke off first day, thin metal,
SweepstakesYes
No, I do not recommend this product.
Reviews 2
5 out of 5 stars.
Very solid piece of equipment. Works better than I
8 months ago
Very solid piece of equipment. Works better than I thought it would
SweepstakesYes
Yes, I recommend this product.