Tazz K33 3 in. Gas Powered 301cc Viper Engine Chipper/Shredder at Tractor Supply Co.
Skip to Main Content
MESSAGE

Tazz K33 3 in. Gas Powered 301cc Viper Engine Chipper/Shredder

SKU # 119631899
Product price

Save Up To
See Price at Check Out
Why?
Product Rating is 4.4
4.4
(37)

Financing Available! Click here for more details...

Quantity

Autoship

Delivery Options:

Protect Your Purchase

We'll fix it, replace it, or reimburse you for it. Learn More

power plus

Item Information

The Tazz K33 Chipper/Shredder offers incredible performance in a surprisingly compact package. The unit is powered by an easy-starting and powerful Viper engine, strong enough to chip branches up to 3 in. in diameter. The rugged steel hopper stands at only 34 in. high, so yard waste can be dropped in with minimal effort while larger branches can be fed into the limb chute.

  • Mulch can be collected in the included debris bag
  • Grinding chamber features heavy-duty knives and hammers that will reduce material down to 1/20th of its original volume
  • Each model has been tested to, and surpassed, ANSI B71.6 safety standards
  • 5 year limited warranty

Note: This product may require up to 2 additional days for order processing prior to shipping

Specification Description
Engine Displacement: 301 cc
Front Tire Size: 11 in.
Product Height: 34 in.
Warranty: 5-Year Limited
Maximum RPM: 3600
Brand: Tazz
Product Length: 29-11/16 in.
Product Weight: 140 lb.
Shredder: Yes
Engine Type: Gasoline
Product Width: 25-1/2 in.
Chipper: Yes
Vacuum: No
Engine Make: Viper
Power Type: Gas
Product Type: Chipper Shredder Combos
Fuel Capacity: 0.95 gal.
Cutting Diameter: 3 in.
Manufacturer Part Number 22752
Tazz K33 3 in. Gas Powered 301cc Viper Engine Chipper/Shredder is rated 4.4 out of 5 by 37.
Rated 5 out of 5 by from Good machine Shopped around for a long time and read many reviews. I've used it for a few hours. Mulching leaves does a great job. Though I did mulch a lot of wet leaves. After a while the wet leaves blocked up the machine and needed to clean out. It did happen around the time it was recommended to check bolt tightness so no big deal and was to be expected when mulching wet leaves. Look forward to using in the fall on dryer leaves.
Date published: 2018-05-13
Rated 4 out of 5 by from Useable features After an easy assembly it took several uses to learn how to use its features. The hose attachment does not work with larger leaves, leaves get stuck in the hose, smaller leaves no problem. Watch it when using it near rocks they will get sucked up and make a lot of racket. Limb shredder has handled everything for its size with no problems. I would recommend this shredder knowing its limitations.
Date published: 2018-04-02
Rated 5 out of 5 by from Very powerful. I have used this shredder/chipper only on leaves and small twigs so far. It does a great job on them as long as they are fed slowly. The chipper/shredder is powerful enough to handle the load but the twigs will form a bridge along the lower part of the chute and prevent the rest of the load to filter down. I think they all do this so it's not a problem specific to the machine.
Date published: 2018-02-17
Rated 2 out of 5 by from Have your sockets & wrenches ready This shredder is great for dry branches. The first hour of use, I used it to shred limbs from a pine tree. The machine locked up and would not turn over. I had to completely disassemble the shredder to clean it. The instructions say to alternate loads of wet and dry material to prevent the discharge from becoming plugged. From my experience, I’d say not to use wet material at all. It took me several hours to tear apart the shredder, clean it, and then bolt it back together again. I still have a number of pine tree branches cut. I’m letting them dry out before I try shredding them.
Date published: 2018-01-08
  • y_2018, m_7, d_14, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_US, sid_119631899, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply

does it work better chipping fresh cut wood or dried branches i know the fresh stuff is more flexible but the dry stuff seems like it will be harder on the blades? also how does it do with leaves? and vine plants there are alot of wild grape vines here?

Asked by: Brian1985
With all of the Tazz Chipper/Shredder units we suggest only dry and dead material. If you are using fresh material it will cause the rotor to get plugged up and will constantly need to be cleaned out.
Answered by: DanielB
Date published: 2017-09-14
  • y_2018, m_7, d_14, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_119631899, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
Attachments (  1 - 1 of 1  )