Skip to Main Content

For security, click here to clear your browsing session to remove customer data and shopping cart contents, and to start a new shopping session. 

Tractor Supply Co.

We Are Listening...

Say something like...

"Show me 4health dog food..."

You will be taken automatically
to your search results.

Please enable your microphone.

Your speech was not recognized

Click the microphone in the search bar to try again, or start typing your search term.

We are searching now

Your search results
will display momentarily...

Main Content
MESSAGE

Swisher ATV Mount Kit, 2646

Enter Zip Code for price More Info

Sale Save Up To

See price at checkout

Financing Available Learn More

The Swisher ATV Mounting Kit attaches to the rear hitch and front lower control arms of most ATVs. It's made from steel square tubing with a leaf spring design to help bolster the front suspension. Use the kit with Swisher's plow blades and dump bucket for fast changes between attachments. Remove the kit by simply removing the pins, leaving the brackets on the ATV for fast, simple future installations. Additional required mounts to be used in conjunction with the 2646 for Bombardier ATV models: #7668 Bombardier Outlander(A-arm mount) and Suzuki King Quad #2900 Mount extension for ATV's with a wheel base greater than 72 inches. The fit criteria is as follows... From the receiver hitch hole under the middle of the ATV to about 2 inches in front of the outermost round part of the tire should be no less than 63in. If the measurement comes out to be greater than 73 in. the extension kit part number 2900 must be used in order ensure proper fit and strength of the Swisher Universal Mount Kit. The Swisher Universal Mount kits are only to be used for ATVs with no smaller than a 350CC engine. This is not a UTV application for UTV application you must have 10260. Independent Front Suspension with A-Arms ATV must have rear tow hitch bracket Distance from center hole in the hitch bracket to the front of the front tires must be at least 63 in. and not greater than 73 in. Maximum distance between the leaf spring brackets (mounted to the front a-arms) is 32 in. assuming 4 in. of spring overlap at center of ATV between Spring Mounting Plates. Minimum recommended ATV size is 350 cc Minimum recommended ground clearance is 9 in.

  • Fits most ATV's
  • Attaches to rear hitch and front A-arms
  • Leaf spring design of steel tubes bolsters front suspension
  • Used in conjunction with Swisher Plow Blades or Swisher Dump Bucket
The manufacturer's warranty: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. Limitations apply.

Additional Product Information
The quantity requested exceeds available inventory.
Store:Franklin TN Change Store
Please lower quantity or check availability at nearby stores
Check availability at nearby stores
Call Store for availability or check availability at nearby stores

Curbside / Pickup In Store

franklin TN Change Store Item is currently not available for Pickup at this store. Check availability at nearby stores

Standard Delivery

Item is not eligible for Standard Delivery.

Standard Delivery

Item is currently not available for Standard Delivery. Check other delivery options.
Curbside / Pickup and Delivery Information Click here for more details...
Add to list

Product Details

The Swisher ATV Mounting Kit attaches to the rear hitch and front lower control arms of most ATVs. It's made from steel square tubing with a leaf spring design to help bolster the front suspension. Use the kit with Swisher's plow blades and dump bucket for fast changes between attachments. Remove the kit by simply removing the pins, leaving the brackets on the ATV for fast, simple future installations. Additional required mounts to be used in conjunction with the 2646 for Bombardier ATV models: #7668 Bombardier Outlander(A-arm mount) and Suzuki King Quad #2900 Mount extension for ATV's with a wheel base greater than 72 inches. The fit criteria is as follows... From the receiver hitch hole under the middle of the ATV to about 2 inches in front of the outermost round part of the tire should be no less than 63in. If the measurement comes out to be greater than 73 in. the extension kit part number 2900 must be used in order ensure proper fit and strength of the Swisher Universal Mount Kit. The Swisher Universal Mount kits are only to be used for ATVs with no smaller than a 350CC engine. This is not a UTV application for UTV application you must have 10260. Independent Front Suspension with A-Arms ATV must have rear tow hitch bracket Distance from center hole in the hitch bracket to the front of the front tires must be at least 63 in. and not greater than 73 in. Maximum distance between the leaf spring brackets (mounted to the front a-arms) is 32 in. assuming 4 in. of spring overlap at center of ATV between Spring Mounting Plates. Minimum recommended ATV size is 350 cc Minimum recommended ground clearance is 9 in.

  • Fits most ATV's
  • Attaches to rear hitch and front A-arms
  • Leaf spring design of steel tubes bolsters front suspension
  • Used in conjunction with Swisher Plow Blades or Swisher Dump Bucket
The manufacturer's warranty: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. Limitations apply.

Specifications

Specification Description
Additional Item(s) Included None
Product Weight 47
Product Width 24.5
Country of Origin Imported
Brand Swisher
Mounting Location Under ATV.
Compatibility ATV.
Maximum Weight Capacity N/A
Product Length 73.25
Package Quantity 1
Hitch Type N/A
Special Feature(s) Fits most ATV's.
Color Black
Part Number 2646
Type Mounting Kit
Material Steel.
Product Height 7
Manufacturer Part Number 2646

Reviews

Swisher ATV Mount Kit, 2646 is rated 4.5 out of 5 by 19.
Rated 5 out of 5 by from Very pleased Well constructed and doesn't interfere with my ground clearance.
Date published: 2020-06-06
Rated 4 out of 5 by from Good Product, Weak Instructions Seems to be a sturdy piece of equipment that is required in order to mount the Swisher dump bucket on the front of my Polaris Sportsman 570. The instructions are somewhat weak, so there was a fair amount of trial and error to get things right. Since my ATV didn’t have a pre-installed ball mount, i had to get one that would slide into my 1 1/4 inch receiver on the back of my ATV. Also, I had to adjust/change the front part of the frame a few times due to the weak instructions. If you encounter rubbing of the bucket support on your front tires, just adjust the main frame so that the part that mounts the bucket slides forward until it all clears your tires. I’ve got mine working fine now. I would recommend this item as mandatory for anyone who plans on getting the Swisher Dump Bucket.
Date published: 2020-05-10
Rated 5 out of 5 by from easy to install works great pretty easy to install about 2 hours stronger then I thought it would be
Date published: 2020-03-19
Rated 5 out of 5 by from Replacing the original frame After 12 years it was time to replace the original frame. This kit is the exact replacement part and fit right in. Tractor Supply shipped it to my store and it was a simple flawless transaction and install.
Date published: 2020-01-06
  • y_2020, m_9, d_18, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_16
  • loc_en_US, sid_440078199, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms
  • REVIEWS, PRODUCT

Questions & Answers

Will this fit a 2004 Yamaha Kodiak 450F?

Asked by: jlewi2

Will the 2646 bracket fit a Suzuki Vinson 500cc 4WD?

Asked by: PatrickR
Yes, this should fit your machine. The fit criteria is as follows... From the receiver hitch hole under the middle of the ATV to about 2 inches in front of the outermost round part of the tire should be no less than 63 inches If the measurement comes out to be greater than 73 inches the extension kit part number 2900 must be used in order ensure proper fit and strength of the Swisher Universal Mount Kit. • The Swisher Universal Mount kits are only to be used for ATVs with no smaller than a 350CC engine. This is not a UTV application, For UTV application you must have 10260. • Independent Front Suspension with A-Arms • ATV must have rear tow hitch bracket • Distance from center hole in the hitch bracket to the front of the front tires must be at least 63” and not greater than 73” • Maximum distance between the leaf spring brackets (mounted to the front a-arms) is 32” assuming 4” of spring overlap at center of ATV between Spring Mounting Plates. • Minimum recommended ATV size is 350 cc • Minimum recommended ground clearance is 9”
Answered by: Swisher Product Expert
Date published: 2020-04-22

Will this fit the CFMoto800-3 UTV? If not, where is the other item listed as 10260?

Asked by: Pelea
Thank you for your interest in Swisher. To correctly identify which system will work on your machine, we need some information from you. Please contact us at 800.222.8183 Mon-Fri 8 am - 4 pm CST.
Answered by: Swisher Product Expert
Date published: 2019-10-14

Will this fit 2018 Polaris 850 SP with Factory arched a arms

Asked by: Chickenbone 1981
Thank you for your interest in Swisher. Unfortunately, we do not recommend using this mount on your machine. If your machine has a front receiver hitch, you can use Swisher's 10260 UTV Universal Receiver Mounting Kit.
Answered by: Swisher Product Expert
Date published: 2019-11-13

Will this fit a 2006 Honda rincon 680 ?

Asked by: Fmjoey
Yes, this should fit your machine. The fit criteria is as follows... From the receiver hitch hole under the middle of the ATV to about 2 inches in front of the outermost round part of the tire should be no less than 63 inches If the measurement comes out to be greater than 73 inches the extension kit part number 2900 must be used in order ensure proper fit and strength of the Swisher Universal Mount Kit. • The Swisher Universal Mount kits are only to be used for ATVs with no smaller than a 350CC engine. This is not a UTV application for UTV application you must have 10260. • Independent Front Suspension with A-Arms • ATV must have rear tow hitch bracket • Distance from center hole in the hitch bracket to the front of the front tires must be at least 63” and not greater than 73” • Maximum distance between the leaf spring brackets (mounted to the front a-arms) is 32” assuming 4” of spring overlap at center of ATV between Spring Mounting Plates. • Minimum recommended ATV size is 350 cc • Minimum recommended ground clearance is 9”
Answered by: Swisher Product Expert
Date published: 2019-03-16

Hello, will this universal mount kit fit a 1997 Polaris Sportsman 500? Thank You

Asked by: Skipperpete

Will this fit a 1999 grizzly Yamaha 4 x 4 600

Asked by: Mike37
Yes, this should fit your machine. The fit criteria is as follows... From the receiver hitch hole under the middle of the ATV to about 2 inches in front of the outermost round part of the tire should be no less than 63 inches If the measurement comes out to be greater than 73 inches the extension kit part number 2900 must be used in order ensure proper fit and strength of the Swisher Universal Mount Kit. • The Swisher Universal Mount kits are only to be used for ATVs with no smaller than a 350CC engine. This is not a UTV application for UTV application you must have 10260. • Independent Front Suspension with A-Arms • ATV must have rear tow hitch bracket • Distance from center hole in the hitch bracket to the front of the front tires must be at least 63” and not greater than 73” • Maximum distance between the leaf spring brackets (mounted to the front a-arms) is 32” assuming 4” of spring overlap at center of ATV between Spring Mounting Plates. • Minimum recommended ATV size is 350 cc • Minimum recommended ground clearance is 9”
Answered by: Swisher Product Expert
Date published: 2019-01-22

will this mount kit work with a 2005 Arctic Cat 400 4x4

Asked by: rk coal
  • y_2020, m_9, d_18, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_440078199, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms
  • QUESTIONS, PRODUCT

Documents

Attachments (  1 - 1 of 1  )