This Norse Contractor Table Saw features a cast iron main table with stamped steel extensions to give you a large 40 in. x 27 in. work surface. The 10 in. diameter blade is powered by a 1-3/4 HP motor that is prewired to 120V, but can be wired for 240V operation. The motor draws 15A which means you can run this on normal household current with a 20A breaker. The blade is supported by a cast iron trunnion system that gives you extreme rigid support and produces the same cut that you would get with the more expensive cabinet saws. If you want to see contractor style mobility, this 300 lb. saw comes with 3 in. industrial casters. Step down for mobility and push up for operation. With all 4 legs on the ground, you can make cuts all day and the saw will not move. The saw comes with extruded aluminum rails for the front and rear of the saw. This allows the aluminum rip fence to glide smoothly for quick easy set up. You have a 30 in. rip capacity to the right which means you have more than adequate capacity for ripping a 4 ft. x 8 ft. sheet of plywood. With the blade set at 90° you have a maximum depth of cut of 3-1/8 in. At 45° you still have 2-1/4 in. depth of cut. The included miter gauge lets you do a variety of straight and angle cuts with accuracy. A great feature on this saw is the safety blade guard system that meets UL Standards. The blade guard and anti-kickback pawls are designed for removal and replacement without tools. These can be removed in a matter of seconds for set up of non-through cuts and dado cuts. Once your cut is completed it is just a matter of seconds to replace the safety guard and pawls, with no tools needed. The on-board storage allows you to store the rip fence or miter gauge when they are not being used. This saves time as you do not have to go looking for them if you move the saw at a job site or cover it up in your shop. There is also other component storage on the tool.
- CH Hanson # 9683410 heavy-duty 10 in. contractor saw is designed to be used as a workhorse on the job site or detail work in your shop, garage or basement
Note: This product may require up to 2 additional days for order processing prior to shipping