Skip to Main Content

For security, click here to clear your browsing session to remove customer data and shopping cart contents, and to start a new shopping session. 

Tractor Supply Co.

We Are Listening...

Say something like...

"Show me 4health dog food..."

You will be taken automatically
to your search results.

Please enable your microphone.

Your speech was not recognized

Click the microphone in the search bar to try again, or start typing your search term.

We are searching now

Your search results
will display momentarily...

Main Content

Majic Tractor, Truck & Implement Enamel, Light Ford Gray, 1 gal., 8-2967-1

SKU: 103093999
Majic Tractor, Truck & Implement Enamel, Light Ford Gray, 1 gal., 8-2967-1
Enter Zip Code for price More Info
Product price

Save Up To
See price at checkout More Info
Product Rating is 3.3


800 central st
millinocket, ME 04462
(207) 723-6582
Check Availability at Other Stores
Standard Delivery Not Available to 
Notice: This item will ship within 0 days.
This product may require up to 0 additional days for order processing prior to shipping.

Item Information

Majic Tractor, Truck & Implement Enamel is a durable, heavy-duty alkyd enamel specially formulated for excellent adhesion, and resistance to weathering and corrosion. It may be applied by brush, or spray and dries to a high gloss finish. for use on iron, steel, aluminum, and properly primed galvanized metal.

Specification Description
Transparency: Opaque
Base Material: Oil Base
Container Size: 1 gal.
Container Type: Gallon Metal
Special Feature(s): Outstanding Durability, Excellent Adhesion, Corrosive Resistant, High Gloss Finish, VOC Compliant/Environmentally Friendly
VOC Content %: 340 gms/ltr
Warranty: N/A
Package Size: 1 gallon
Product Height: 7.75 in.
Recommended Number of Coats: 2
Finish: Gloss
Application: Tractor
Flash Point: >105 deg. F
Application Method: Product may be applied by brush, roll or spray. Equipment, pressure and/or tip size may need adjusted depending on conditions, temperatures and humidity at time of applicaiton. Stir paint thoroughly before applicaiton.
Time Before Recoating: 24 hrs.
Package Type: Can
Type: Oil Base Enamel
Dry to Touch: 5 - 10 hrs
Brand: Majic
CountryofOrigin: Made in USA
Interior and/or Exterior Use: Exterior
Surface Compatibility: Iron, Steel, Aluminum and properly primed galvanized metal.
Product Length: 6.13 in.
Finish: High Gloss
Color: Gray
Part Number: 8-2967-1
Operating Temperature Range: Above 50 deg. F and 5 deg. deg. F above dew point
Product Width: 7.5 in.
Type: Oil-Based
Coverage Area: 600 - 700 sq. ft./gal
Product Weight: 9.73 lb.
Manufacturer Part Number 8-2967-1
Majic Tractor, Truck & Implement Enamel, Light Ford Gray, 1 gal., 8-2967-1 is rated 3.3 out of 5 by 3.
Rated 1 out of 5 by from Pretty sure they use this stuff on lottery tickets Does not cure or harden even using catalyst hardener....2 days later and can still scratch through the paint with my fingernail
Date published: 2019-06-13
  • y_2020, m_7, d_11, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_1
  • loc_en_US, sid_103093999, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 2ms

What flattening agent can I us with this paint?

Asked by: Davibdich
Please see the response from the manufacturer: Majic Tractor, Truck & Implement Enamels are hard-drying, high gloss alkyd enamels designed for exceptional adhesion, with great abrasion, impact & corrosion resistance. We do not manufacture a “flattening agent” for use with this product, and cannot recommend one be added. Flatting pastes are made up of soft minerals that absorb, and protrude through the remaining resin – lowering the sheen, but diminishing the film’s protective & performance properties. Though we do not recommend that flatting pastes be added, if you go this route – be sure to find one that is compatible with oil/alkyd resins, and not for use with lacquers, polys or 2K finishes.
Answered by: ZackZ
Date published: 2019-11-19

will this paint adhere to plastic trim pieces? have a lawn tractor with a lot of plastic I would like to paint as well

Asked by: jason111
Painting plastic trim is similar to painting fiberglass. Make sure the surface is clean & dry and scuff sand glossy, slick surfaces. A greater adhesion may be realized with the application of a Plastic Adhesion Promoter prior to priming with Majic Tractor & Implement Primer.
Answered by: NRoberts
Date published: 2019-08-01

Reduced 8:1, can this enamel be applied with an Airless Sprayer? Thank You

Asked by: query
Please see the manufacturer's response below: The preferred methods for spraying Majic Tractor, Truck & Implement Products is conventional spray, HVLP or LVLP application. Airless application is certainly possible, but Majic T&I products require a very thin applied film (recommended 2.5 mils wet) with a minimum of 24 hours dry time between coats. Airless applies a lot of paint in a very short period of time, and can very quickly, & easily, be applied too heavy (too heavy an application, and/or re-coating too soon will result in a much slower dry & cure – possibly several days, or longer). A successful application with airless will largely depend on your equipment, and your experience & ability to measure, or recognize, the appropriate applied film thickness. If you opt for this type of application, I would recommend an 8:1 reduction of Majic T&I Enamel (with Majic Reducer, #8-0750), and use a Fine Finish .013 tip
Answered by: MatthewL
Date published: 2019-06-16

Can this paint be applied on a painted surface or only to a primed or bare metal surface?

Asked by: Davibdich
Majic Tractor, Truck & Implement Enamels may be applied to a painted surface, as long as the existing coating is adhering tightly, and in good condition. Any loose, or peeling, paint must be removed by sanding, scraping, etc., then the blunt edges of remaining paint must be sanded smooth, and flush to the substrate. Aside from sanding to remove loose paint, the entire surface of an existing coating should be sanded with a fine grit paper to remove any gloss, and to create a “profile” for a stronger mechanical bond between the existing and newly applied coating. Please refer to the label instructions for additional surface preparation guidelines, as well as application instructions with special attention to the recommended applied thickness, and allowable re-coat times (too heavy an application, and/or re-coating too soon will result in a film that won’t dry “hard” for several days… or longer).
Answered by: NRoberts
Date published: 2019-11-12

Can this be used on aluminum boat surface top side without primer.

Asked by: davidd0101
Assuming the aluminum surface has been previously painted, is clean, and in good, sound condition, no primer would be necessary before applying 1-2 coats of Majic T&I Enamel in accordance to package directions… if the aluminum is bare, the surface should be sanded with a medium grit paper, etched with a 50/50 vinegar & water solution and allow to dry, then primed with 1 coat of Majic T&I Sandable Gray (8-6055), or Red Oxide Primer (8-2989) in strict accordance to package directions.
Answered by: NRoberts
Date published: 2020-06-09

What do you thin it with?

Asked by: Dennylee10
The best (only) recommendation we can make for thinning/reducing any of the Majic Tractor & Implement Enamels, or Primers, is with Majic Reducer, #8-0750, SKU #1177119 at a ratio of 8:1 (8 parts Majic T&I Coating to 1 part Majic Reducer). Majic Reducer is a proprietary blend of “exempt” solvents that allow T&I Products to be reduced – without adding any VOC to the host product (Reducing product with Mineral Spirits, or VM&P Naptha would work (at approximately the same ratio), but would add enough VOC’s to knock the product of VOC compliancy)…
Answered by: NRoberts
Date published: 2020-03-25

can this be applied on interior cement floors

Asked by: David 1234567890
Use on interior cement is not recommended. It is best formulated for use on iron, steel, aluminum and properly primed galvanized metal.
Answered by: Customer Solutions
Date published: 2017-04-11

Can I use this product without a catalyst hardener?

Asked by: Bergs
Absolutely…while benefit, in terms of increased hardness & accelerated curing, will be realized by adding Majic Catalyst Hardener to Majic Tractor, Truck & Implement Enamels, the use of such is completely optional. Majic Tractor, Truck & Implement Enamels are hard-drying, industrial oil/alkyd enamels that exhibit excellent adhesion and corrosion resistance to the surface being painted (without the use of a catalyst hardener). One other option to consider is the application of 1 or 2 coats of Majic Clear Coat High Gloss Lacquer, applied to the final application of Majic T&I Enamel. Majic Clear Coat provides the benefit of a greater depth of image to the finish, and better resistance to the damaging effects of UV light (better gloss & color retention). An application of Majic Clear Coat is NOT required, and again, strictly optional. Remember with each of the products discussed, it is critical to follow application directions very carefully – apply product in thin coats, and allow a full 24 hours to dry between coats. If you opt to use Majic Clear Coat, allow the final coat of enamel 14 days to cure before applying.
Answered by: NRoberts
Date published: 2019-04-13
  • y_2020, m_7, d_11, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_103093999, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms