Cart: There are no items in your cart
Black Bull™ Drill Press with Laser Guide & Work Light, 16 Speed
error
Click to enter your zip code for pricing
SKU Number: 3900673
Manufacturers Number: DP16UL
Brand: Black Bull™
Stand Type: Floor
Motor Type: Electric
Motor HorsePower: 1/2 HP
Voltage: 120 V / 60 Hz
Overall Height: 55 in.
Number of Speeds: 16
Minimum RPM: 210
Maximum RPM: 3840
Maximum Drill Chuck Size: 5/8 in.
Table Material: Cast Iron
Laser Guide: Yes
Product Width: 9-1/2 in.
Product Length: 19 in.
Product Height: 55 in.
Product Weight: 119 lb.
Warranty: 90-Day Limited
Manufacturers Number: DP16UL
Brand: Black Bull™
Stand Type: Floor
Motor Type: Electric
Motor HorsePower: 1/2 HP
Voltage: 120 V / 60 Hz
Overall Height: 55 in.
Number of Speeds: 16
Minimum RPM: 210
Maximum RPM: 3840
Maximum Drill Chuck Size: 5/8 in.
Table Material: Cast Iron
Laser Guide: Yes
Product Width: 9-1/2 in.
Product Length: 19 in.
Product Height: 55 in.
Product Weight: 119 lb.
Warranty: 90-Day Limited
Description
The Black Bull™ Drill Press with Laser Guide & Work Light features a laser-centering device for an exact center every time.
- Laser guide makes centering easy & work light illuminates work surface
- 12 in. diameter dry round worktable adjusts in height & tilts 90 degrees, +/- 45 degrees left/ right
- Rack & pinion table raises and lowers easily
- Cast iron table, base and drill body
- Enclosed fan cooled motor
- Belt drive speed adjustment
- 5/8 in. chuck capacity
- Rated voltage: 120V/ 60Hz
- Max speed: 3,840 RPM
- Motor: 1/2 HP
- Rated current 4.8 A / 550 W
- 2 AA batteries required to operate the laser guide
- Batteries are not included
- 90 day limited warranty
Reviews
Black Bull¿Black Bull¿ Drill Press with Laser Guide & Work Light, 16 Speed 
Product Reviews
Overall Customer Rating:
Rating Snapshot (12 reviews)
5 stars
6
4 stars
2
3 stars
4
2 stars
0
1 star
0
12 out of 12(100%)customers would recommend this product to a friend.
Share this product:
12
12Drill Press | Brand : Black Bull¿ | Stand Type : Floor | Motor Type : Electric | Motor HorsePower : 1/2 HP | Voltage : 120 V / 60 Hz | Overall Height : 55 in. | Number of Speeds : 16 | Minimum RPM : 210 | Maximum RPM : 3,840Product Reviews
Overall Customer Rating:
Rating Snapshot (12 reviews)
5 stars
6
4 stars
2
3 stars
4
2 stars
0
1 star
0
12 out of 12(100%)customers would recommend this product to a friend.
Share this product:
Rating:
Location: Junction City, KS
good priced tool, bad factory design
Date:December 27, 2011
I got this drill press as a gift and was very excited until I started assemblying it. The book was very poorly written as for assembly instructions. Once I started putting it togeather I ran into a major malfunction. The crank that raised and lowered the table would not work at all as it was wedged tight and when I was able to get it broke loose it still did not work right. When I went to put the batteries in the laser light compartment half the battery connections were missing and some were bad. I did some test drilling with it and it did drill nicely and very smooth which I liked, but the other malfuntions would make it to hard to do a good job. It is on it's way back to the store and we will see what happens and will let you know the outcome of the situation.
1 of 1 found this review helpful.
Was this review helpful?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
Share this review:
A pretty good tool
Date:May 16, 2011
Bought drill already assembled.
There was no switch key.
The laser light box and switch was broken.
Called Buffalo tools and they sent me
replacement parts.
Drill seems to work ok, but the
laser light is a joke. If you want a drill press
with a reliable laser, don't buy this one.
There was no switch key.
The laser light box and switch was broken.
Called Buffalo tools and they sent me
replacement parts.
Drill seems to work ok, but the
laser light is a joke. If you want a drill press
with a reliable laser, don't buy this one.
Was this review helpful?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
Share this review:
Rating:
Location: shapleigh ,ME
good drill great price
Date:March 21, 2011
I picked this drill press up this weekend got it assembled in about half hour it was easy the drill works great I drilled 20 5/8 holes in half inch thick steel with no issues the laser is junk but i dont care good drill for the money very happy.
Was this review helpful?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
Share this review:
Rating:
Location: Dalmatia, PA
Good Tool, Not Great Instructions
Date:December 30, 2010
I wish I would have read the last review before I tried to put this thing together! While it was mostly a breeze to assemble, there is a part that must be installed before attempting to place the chuck on the drill...there is no mention of it in the directions, so be careful! Now that it's together, I am very happy with it. While I did find myself purchasing a clamp for the table, I certainly can't complain that it didn't come with one, especially for the price. The belts are very tight, but the functionality is very good. The range of speeds is excellent, the movement good, and overall this is just a very good tool for the money.
Was this review helpful?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
Share this review:
