Welcome Guest
Shop
Based on your location, we believe this is the store closest to you. If you would like to change to a different store, please click here.
X  Close

JobSmart® Portable Abrasive Blaster

Share |
View Details
 

Why is this information important?
  • To View Local Pricing
  • To Shop Online
  • To Check In-Store Availability
In Stock - Order Online
Out of Stock
Quantity
Add to Cart
 
Add To Wish List
In Stores - Check Availability

SKU 3999698

Portable Sandblaster | Brand : JobSmart® | Minimum Operating PSI : 60 PSI | Maximum Operating PSI : 125 PSI | Minimum Air Consumption : 6 CFM | Maximum Air Consumption : 25 CFM | Tank Size : 20 gal. | Hose Length : 8 ft. More

Remove oxidation, paint and rust with the JobSmart® Portable Abrasive Blaster. This steel sandblaster allows for a diverse amount of surfaces to be cleaned during a single blast time. Designed for contractors and serious do-it-yourselfers, this steel sandblaster is an easy way for you to clean a variety of different surfaces including metal, wood, brick or concrete. Features a spring-loaded design with auto-closing nozzle and 20 gal. tank with shut-off valve. Includes 8 ft. hose, blasting hood, tape and funnel.
  • Minimum operating PSI: 60
  • Maximum operating PSI: 125
  • Tank Size: 20 gal.
  • Hose Length: 8 ft.
  • 90 day limited warranty
 
JobSmart® Portable Abrasive Blaster is rated 3.625 out of 5 by 16.
Rated 4 out of 5 by from Happy with,, except This Product is great, Did exacly what I wanted it to do, BUT!!!! When it came time to replace some of the parts like the abrasive hose or the shield for the hood it became a hassal, had to order the hose and the shield can't be replaced, NOR can you purcase a new hood, Come on guys if you going to sell something atleast have replacement parts on hand!!!
Date published: 2014-01-15
Rated 2 out of 5 by from Could be better What a pain in the back and knees to get the unit started. This needs a better design to turn the media flow on and off. First, one cannot see the valve that starts the flow of media. A person must get down on their knees then bend over to almost kiss the ground before the valve that controls the media can be seen. Second, if the valve is opened all the way the media will feed to fast and the hose will plug up if the trigger on the nozzle is closed. Also when using, NEVER close the trigger before closing off the media flow valve. To do so will cause the hose to plug. What a pain to clear the hose. The hose must be removed from the tank. Then using a rubber tipped air gun press the rubber tip against the ceramic tip and blow the media out the end of the hose that was removed from the bottom of the tank. There most likely be a great deal of media in the hose. Make sure to follow the directions closely. On my second try I opened valve 19 first, then valve 19A (this one blows the air out of the nozzle). Last, while holding the trigger (dead man)open move valve 19b (media flow valve) just a little bit. You will hear a change in the air flow exiting the nozzle which signals media is present (DO NOT RELEASE THE TRIGGER ON THE NOZZLE UNTIL YOU TURN OFF THE MEDIA VALVE FIRST) Once media is present start your job. If you need more media flow open the media valve slightly and try again (Do not open the valve all the way open). I have a 19 CFM compressor at 100 psi and it took only a few seconds to plug the hose when I allowed the trigger on the nozzle to close before I closed the media control valve. I would like to see a remote control cable to open and close the media control valve. Plus, too much pressure is needed to keep the trigger open causing a cramp in one's hand in short order. A lighter spring effort would be a big help.
Date published: 2014-03-15
Rated 4 out of 5 by from Black Bull Sandblaster Black Bull Sandblaster works great with the proper compressor and media. Sandblasting is messy but it beats sanding areas in hard to get places. Play sand for me worked the best. This system will blow rust and paint off like an air blower blows dust off a window seal.
Date published: 2014-03-15
Rated 5 out of 5 by from Sandblaster I purchased this product to you in my wrought iron business and am so pleased that it is just what I was looking for. The sales people at the store were extremely helpful in locating the products that were needed and took time to wait on my Very pleased and would recommend TSC to anyone for any products they sell
Date published: 2014-03-15
  • Brand - JobSmart®
  • Abrasive Capacity - 50 lb.
  • Body Finish - Powder Coat
  • Body Material - Steel
  • Hose Length - 8 ft.
  • Maximum Air Consumption - 25 CFM
  • Maximum Operating PSI - 125 PSI
  • Minimum Air Consumption - 6 CFM
  • Minimum Operating PSI - 60 PSI
  • Product Height - 16-1/2 in.
  • Product Length - 34-1/2 in.
  • Product Weight - 55 lb.
  • Product Width - 17-3/10 in.
  • Tank Size - 20 gal.
  • Warranty - 90-Day Limited Warranty
  • Manufacturer Part Number - JSSB20G