Cart: There are no items in your cart
CountyLine® 4 ft. Sub-Compact Rotary Cutter with a 40 HP Gearbox
error
Click to enter your zip code for pricing
SKU Number: 2122515
Manufacturers Number: L-48-40-XB-OW
Brand: CountyLine®
Hitch Type: Category 1
Working Width: 48 in.
Gear Box Rating (HP): 40 HP
Blade Tip Speed: 12,136 FPM
Deck Thickness: 12 ga.
Minimum Cutting Height: 3 in.
Maximum Cutting Height: 8 in.
Blade Width: 3 in.
Blade Length: 18 in.
Blade Thickness: 1/2 in.
Tire Type: Solid
Tire Size: 9 in. x 3-1/2 in.
Product Height: 32 in.
Product Length: 60 in.
Product Weight: 422 lb.
Product Width: 53 in.
Warranty: Limited
Manufacturers Number: L-48-40-XB-OW
Brand: CountyLine®
Hitch Type: Category 1
Working Width: 48 in.
Gear Box Rating (HP): 40 HP
Blade Tip Speed: 12,136 FPM
Deck Thickness: 12 ga.
Minimum Cutting Height: 3 in.
Maximum Cutting Height: 8 in.
Blade Width: 3 in.
Blade Length: 18 in.
Blade Thickness: 1/2 in.
Tire Type: Solid
Tire Size: 9 in. x 3-1/2 in.
Product Height: 32 in.
Product Length: 60 in.
Product Weight: 422 lb.
Product Width: 53 in.
Warranty: Limited
Description
The CountyLine® 4 ft. Sub-Compact Rotary Cutter is great for cutting your pasture to promote healthy growth, or maintaining your property. It is constructed with rugged steel side rails and a fully reinforced top deck. The 40 HP gearbox is cast iron and the 1/2 in. thick blades are attached to a stump jumper. It also has twin tail wheels and a shielded PTO shaft with a shear pin. The hitch is a limited category 1 made for attaching to today's sub-compact tractors.
- Working Width: 48 in.
- 40 HP
- Deck Thickness: 12 in.
- Minimum Cutting Height: 3 in.
- Maximum Cutting Height: 8 in.
- 9 in. x 3-1/2 in. solid tires
- 53 in. x 60 in. x 32 in.
- 422 lb.
- Limited warranty
NOTE: Product assortment and specifications may vary by store location.
Reviews
CountyLine®CountyLine® 4 ft. Sub-Compact Rotary Cutter with a 40 HP Gearbox 
Product Reviews
Overall Customer Rating:
Rating Snapshot (8 reviews)
5 stars
5
4 stars
2
3 stars
0
2 stars
0
1 star
1
5 out of 8(62%)customers would recommend this product to a friend.
Share this product:
8
8Rotary Cutter | Brand : CountyLine® | Hitch Type : Category 1 | Working Width : 48 in. | Gear Box Rating (HP) : 40 HP | Blade Tip Speed : 12,136 FPM | Deck Thickness : 12 ga. | Minimum Cutting Height : 3 in. | Maximum Cutting Height : 8 in.Product Reviews
Overall Customer Rating:
Rating Snapshot (8 reviews)
5 stars
5
4 stars
2
3 stars
0
2 stars
0
1 star
1
5 out of 8(62%)customers would recommend this product to a friend.
Share this product:
No KUBOTA BX1500!
Date:August 11, 2011
Bought and will return. Quality OK, but 3 point pins are 26 inches apart and Kubota BX1500 hitch only stretches to 24 and forcing it, 25, inches.
Tilton store crew VERY helpful, great service.
Too bad unit does not fit my tractor, I like the unit.
Manual in the tube on top of deck is for the single wheel unit except for last page, the parts list. Apparently there is no specific manual for the 2 wheel model, but everything about assembly is obvious and operations is same.
1 of 1 found this review helpful.
Was this review helpful?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
Share this review:
Rating:
Location: Kentucky
Good buy
Date:May 31, 2011
Bought this about a month ago to clear 4 acres of mostly wooded lot. It is behind an 18.5 HP Kubota and works great. It really mows the nice areas like a finish mower, and then will tear up trees 2" and more in diameter. The only advice I have is for the 2 rear wheels. They are held in by 2 standard pins, but they are easily lost when backing into bushes. I put adjustable clevis pins in with cotter keys and have not had a problem since then. This setup has really surprised me for how well it can tear up trees and bushes.
Was this review helpful?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
Share this review:
Rating:
Location: 10 Acres of New Jersey
Cutter is So-So
Date:May 30, 2011
This cutter would probably do a good job on level ground but there is no way to adjust the rear wheels for height and every time you back up you dig into the ground if you do not raise it with the tractor. It appears in the directions that they are written for a cutter with one rear wheel and it shows how to adjust that. The quality seems OK, but if it will not do what is supposed to do that is why I am giving it "1" Star.
Was this review helpful?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
Share this review:
Solid, but could be better
Date:August 21, 2010
This is a solid piece of equipment, but I think that it could use a few more welds to make it even better. My unit came with a few small missing pieces and no manual (and I could not find a manual on line).
Was this review helpful?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
Share this review:
